Burkert 0287 Руководство по эксплуатации - Страница 10
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Блок управления Burkert 0287. Burkert 0287 16 страниц. 2/2-way solenoid valve, stackable
Печатать страницу
6.2 Before installation
Installation position: any, actuator preferably upwards.
Procedure:
→
Check pipelines for dirt and clean.
→
Install a dirt filter before the valve inlet (≤ 400 µm).
6.3 Installation
NOTE!
Caution risk of breakage!
• Do not use the coil as a lever arm.
→
Hold the device using a suitable tool on the body and screw into
the pipeline (maximum permitted torque for line connection 40 Nm).
Valve body must not be installed under tension.
Sealing material must not get into the device.
→
Observe function of the valve (see specifications on the type label).
10
english
Devices with solder connection:
NOTE!
Danger of overheating!
• During the soldering process disconnect the solder connections
from the valve.
6.4 Electrical connection of the cable plug
WARNING!
Risk of injury due to electrical shock!
▶ Before reaching into the system, switch off the power supply and
secure to prevent reactivation.
▶ Observe applicable accident prevention and safety regulations for
electrical equipment.
If the protective conductor is not connected, there is a risk of electric
shock!
▶ Always connect protective conductor and check electrical continuity.