Dialighting IW19-10 ZOOM Руководство пользователя - Страница 14

Просмотреть онлайн или скачать pdf Руководство пользователя для DJ оборудование Dialighting IW19-10 ZOOM. Dialighting IW19-10 ZOOM 20 страниц.

second or wait for about one minute to exit the menu mode.

4. Control By Universal DMX Controller

1. If you using a controller with 5 pins DMX output, you need to use a 5 to 3 pin adapter-cable.

At last unit, the DMX cable has to be terminated with a terminator. Solder a 120 ohm 1/4W

resistor between pin 2(DMX-) and pin 3(DMX+) into a 3-pin XLR-plug and plug it in the DMX-

output of the last unit.

Connect the unit together in a `daisy chain` by XLR plug from the output of the unit to the

input of the next unit. The cable can not branched or split to a `Y` cable. DMX 512 is a very

high-speed signal. Inadequate or damaged cables, soldered joints or corroded connectors can

easily distort the signal and shut down the system.

The DMX output and input connectors are pass-through to maintain the DMX circuit, when

13D