Alloy POE2000LC S Series Руководство - Страница 9
Просмотреть онлайн или скачать pdf Руководство для Медиаконвертер Alloy POE2000LC S Series. Alloy POE2000LC S Series 10 страниц. 10/100/1000base-tx to 1000base-sx/lx and sfp converter poe power provider
Печатать страницу
7. LED Description
The following table describes the LED's located on the POE200 Series media
converter.
LED
FX LNK/ACT
TP LNK/ACT
Green
TP SPD
Amber
PWR
PoE PSE-TP
4W
7W
15.4W
8. DIP Switch and Reset Button
Fig. 11 Reset button and S1—Bit 1, 2, 3 Configuration and Setting
Reset :
Once S1-1, S1-2 is changed, please press this button to have
the settings take effect.
S1-1 Bridge mode :
S1-2 LFP
S1-3 PoE ON/OFF :
Note:
1. S1-1 :
Cut through mode supports jumbo frame size up to 9216Bytes.
Normal mode supports frame size up to 2048 Bytes
2. S1-3 :
Must be set to PoE ON to supply power to PD device.
Colour
Lit when fibre connection is present
Green
Blinks when fibre data is present
Lit when TP connection is present
Green
Blinks when TP data is present
Green Lit when TP speed is 1000Mbps
Amber Lit when TP speed is 100Mbps
Off when TP speed is 10Mbps
Lit when 5V power is applied
Green
Green
Lit when PoE feeding power is active
Lit when PoE feeding power is disrupted
Red
(In case of overtemperature/overcurrent )
Green
Light when PD Class Type is Class 1
Green
Light when PD Class Type is Class 2
Green
Light when PD Class Type is Class 0 or 3
Cut through (default) or Normal
:
LFP enabled(default) or disabled
Enable(default) or disable
Function