Alloy LED AL-60-03-0008 Спецификации и инструкции - Страница 2

Просмотреть онлайн или скачать pdf Спецификации и инструкции для Переключатель Alloy LED AL-60-03-0008. Alloy LED AL-60-03-0008 7 страниц. Led wifi controller hub

Печатать страницу
Alloy LED AL-60-03-0008 Спецификации и инструкции
Using the WiFi Hub with the Receiver for Wireless Remote Controllers (AL-60-03-0004)
(WiFi Hub wirelessly connected to router)
WLAN
12V DC power input
12V DC power input
5
5
ISO9001：2008
1. Connect the Radialux
Output
Output
Wireless Receiver specification sheet.
2. Download the LED WiFi Controller Hub application from the Apple app store or Google Play by
RF Signal
RF Signal
searching for "easylighting" or scanning a QR code (right).
3. Connect your cell phone to WFi Hub network directly. (Password: 0123456789)
4. Open the WiFi Hub "easylighting" application and operate according to the application manual.
24.2
24.2
www.AlloyLED.com
Page 2 of 7
®
®
ISO9001：2008
DC power
tape light and Wireless Receiver(s) according to the instructions on the
®
Operation frequency
Operation frequency
2.4G
|
Call: 800.910.LEDS [5337]
Method 2:
SR-2818WITR-N(B)
DC power
DC power

Operation

1.Download application from 'app store' or 'google play' by sea
dimension code.
Andriod
2.4G
2.If SR-2818WiN has connected with router, then connect you
If SR-2818WiN did not connect with router, then connect your c
(Password:0123456789)
3. Open the easylighting application and operating according t
Safety & Warnings
1) The product shall be installed and serviced by a qualified pe
2) IP20.Please avoid the sun and rain. When installed outdoor
enclosure.
3) Always be sure to mount this unit in an area with proper vent
4) Please check if the output voltage of any LED power supplie
product.
5) Never connect any cables while power is on and always ass
before switching on.
6)
Please ensure that the cable is secured tightly in the connec
7) For update information please consult your supplier.
| Text: 510.400.6690
Router
Connect your cellphone with
Method 2:
Connect your cellphone with
(WiFi -RF)
(WiFi -RF)
SR-2818WITR-N(B)
12V DC power input
Operation
1.Download application from 'app store' or 'google
dimension code.
Andriod
Android
2.If SR-2818WiN has connected with router, then c
If SR-2818WiN did not connect with router, then co
(Password:0123456789)
3. Open the easylighting application and operating
Safety & Warnings
1) The product shall be installed and serviced by a
2) IP20.Please avoid the sun and rain. When instal
enclosure.
3) Always be sure to mount this unit in an area with
4) Please check if the output voltage of any LED po
product.
5) Never connect any cables while power is on and
before switching on.
6)
Please ensure that the cable is secured tightly in
7) For update information please consult your supp
|
R
Router
Powe
Powe
12V DC power input
IOS
IOS
iOS
v2.3