Dialogic 2000 Series Примечание по установке и настройке - Страница 6
Просмотреть онлайн или скачать pdf Примечание по установке и настройке для Шлюз Dialogic 2000 Series. Dialogic 2000 Series 17 страниц. Media gateway
Также для Dialogic 2000 Series: Краткое руководство по эксплуатации (4 страниц)
Печатать страницу
®
for Microsoft
Office Communications Server 2007 R2
PIMG> pwd
Enter Password:
Admin level accepted.
PIMG-admin> quickcfg
LAN 1 IP Address[10.2.2.3] :
gateway IP address entered in Mediation server)
LAN 1 Subnet Mask[255.255.255.0] :
LAN 1 Default Network Gateway Address[10.2.2.5] :
Network Gateway Address)
LAN 2 IP Address[10.2.2.2] :
LAN 2 Subnet Mask[255.255.255.0] :
Select Line Mode ...
Valid entries:
1. T1
2. E1
Enter Number for Line Mode Selection [T1] :
Select Protocol ...
Valid entries:
1. CAS - Loop Start
2. CAS - Ground Start
3. CAS - E&M Immediate
4. CAS - E&M Delay
5. CAS - E&M Wink
6. ISDN - QSIG
7. ISDN - NI-2
8. ISDN - 5ESS
9. ISDN - DMS-100
Enter Number for Protocol Selection [ISDN - NI-2] :
Saving parameters now...
Parameters successfully configured!
******* Restart Required ******* (Type 'restart')
PIMG-admin> restart
rebooting...
5.2
Final Web Configuration
Once the initial configuration is complete and the DMG2000 has been reset, it is necessary to log into the web
interface by browsing to the IP address of the DMG2000 using "admin" as the user and using the gateway
password ("IpodAdmin" is the default).
During this phase of setup you will need to:
•
Confirm the Line Encoding and Line Framing as required by your T1 or E1 Interface. (Typical settings
are Encoding = B8ZS and Framing = ESF)
•
Configure Microsoft
6
IpodAdmin
(Enter new IP Address that matches
®
Office Communications Server 2007 R2 specific switch settings
(Enter new Subnet Mask)
(Enter new Default
1
6