Dialogic IMG 1010 Краткое руководство по эксплуатации - Страница 6

Просмотреть онлайн или скачать pdf Краткое руководство по эксплуатации для Шлюз Dialogic IMG 1010. Dialogic IMG 1010 10 страниц. Connecting dc power
Также для Dialogic IMG 1010: Руководство по установке (6 страниц), Краткое руководство по эксплуатации (11 страниц), Краткое руководство по эксплуатации (18 страниц), Краткое руководство по эксплуатации (10 страниц), Руководство по установке (9 страниц), Краткое руководство по эксплуатации (4 страниц)

Grounding IMG1010 (DC Version Only)

The DC version of the IMG 1010 should be connected to a true earth ground. To connect

chassis to ground you will need the following equipment:

14-16 AWG machine tool wire (MTW) (green/yellow)



# 10 solderless crimp with two-hole mounting option to connect to grounding lug.



(Dialogic-supplied).

Procedure

1. Remove the two-hole grounding lug at the rear of the IMG 1010 by removing the

grounding screws.

2. Crimp the grounding wire to the lug. Re-attach the lug to the unit using the grounding

screws.

3. Attach the other end of grounding wire to either a grounding point on the mounting

rack or a building ground point.

For more information on connecting IMG 1010 to ground see IMG 1010 - Installation and

Setup Guide > IMG 1010 - Hardware Installation in either the Online Documentation or the

supplied CD.

IMPORTANT: Please read and understand the IMG 1010 technical documentation prior to

performing any setup or installation procedures. The documentation can be accessed through

the following site:

http://www.dialogic.com/support

If the IMG 1010 was purchased with the GCEMS Server then the Linux Red Hat Operating

System and GCEMS application have already been installed. Downloading System Software to

the IMG will be the next step to getting the IMG 1010 configured.

IMG 1010-Installation and Setup Guide > IMG 1010-Software Installation and Setup



If server was not purchased, then one must be configured with Red Hat Enterprise Linux. The

IMG 1010 supports Red Hat Enterprise Linux 3, Red Hat Enterprise Linux 4 and Red Hat

Enterprise Linux 5. Refer to the individual topics located under each of the following headings

in the Online Documentation for more information on configuring the Linux Server.

IMG 1010-Installation and Setup Guide > IMG 1010-Linux Red Hat Installation



IMG 1010-Installation and Setup Guide > IMG 1010-Software Installation and Setup



IMG 1010-Installation and Setup Guide > IMG 1010-SD Card



Configuring Services on GCEMS Server



Dialogic Corporation

IMG 1010 Quick Start Guide

Part # 07-8728-03

Page 6 of 9