AllPondSolutions EF2+ Руководство - Страница 4

Просмотреть онлайн или скачать pdf Руководство для Аквариумы AllPondSolutions EF2+. AllPondSolutions EF2+ 20 страниц. Aquarium external filters

This unit comes complete with a generous supply of 3 core cable, however should any

additional cable be required, the use of an approved waterproof cable connector with a

proper rating is essential. A cord rated for less amperes or watts than the appliance

rating may overheat.

Please Ensure: The power supply must be earthed and fused at 3amps. Regularly

inspect the cable for damage and deterioration. Consult a qualified electrician if in

doubt about any aspects of wiring.

INSTALLATION & USE

Please read the below instructions carefully before beginning to set up your ﬁlter. DO

NOT CONNECT THE UNIT TO THE MAINS UNTIL SET UP IS COMPLETE AND

UNIT IS FILLED WITH WATER.

Important installation information:



The base of the unit must NOT be more than 1.4m (4.5 ft) below the tank water

level.



The water level must NOT be more than 17cm (7 inches) below the tank rim.



It is essential to position your external ﬁlter BELOW your aquarium.



The green hose must be kept taut with no loops and follow a STRAIGHT LINE from

the ﬁlter to the rim of the aquarium. If the hosing is too long the ﬁlter WILL NOT

WORK CORRECTLY.



The inlet pipe should NOT be positioned too close to an air stone, aeration device or

the output valve to avoid reducing the eﬀectiveness of the ﬁlter.