Allpro SPC-54PHT Руководство пользователя - Страница 5

Просмотреть онлайн или скачать pdf Руководство пользователя для Обогреватель патио Allpro SPC-54PHT. Allpro SPC-54PHT 12 страниц. Propane/lp patio heater

Печатать страницу

Allpro SPC-54PHT Руководство пользователя

4. Insert manifold into pole support (see Figure 2).

Insert the manifold assembly through the post

by passing through the hole in the post support.

Note: Make sure hose and regulator assembly

attached to manifold are never bent or kinked

during installation and operation of heater.

5. Attach pole to pole support (Figure 3). Place

pole into pole support center connector.

Tighten six set screws with hex allen wrench

supplied with heater. Note: Set screws are

threaded inside post support.

6. Put propane/LP cylinder cover on base assembly

(see Figure 4). Slide propane/LP cylinder cover

over pole and pole support. Be sure that propane/

LP cylinder cover rests level on the base.

Pole

Support

Figure 2 - Installing Manifold Assembly

114144-01A