Diamant Steam pressure cleaner with Iron Инструкции пользователя - Страница 8
Просмотреть онлайн или скачать pdf Инструкции пользователя для Пароочиститель Diamant Steam pressure cleaner with Iron. Diamant Steam pressure cleaner with Iron 9 страниц.
USING THE AccESSORIES
Attention: We recommend you start with not too strong a jet and increase the intensi-
ty as needed.
• High pressure outlet
High pressure outlet (13, 13a) with or without round brush – to apply as needed.
Use the steam trigger (G1) and direct the first jet onto a cloth to get rid of condensation and
any impurities in the extension tube.
The spray gun is particularly suitable to get rid of dirt and grease from:
•
Work surface joints, cracks or series of units
•
Oven extractors and glass
•
Varnished wood or formica kitchen units
•
Ovens
•
Stainless steel or enamel sinks
•
Washbasins, baths, bidets, toilets, showers, taps
- to eliminate limescale and water spots
•
Doors, windows, stairs
•
Varnished surfaces, car tyre rims, and others
For the first stage of cleaning we recommend you use triangular brush (12, optional).
According to the surface to be treated, use a dry cloth. Finally treat the most difficult and
inaccessible places or those particularly dirty with the spray gun.
Getting rid of spots
Direct the steam onto the spot at the right distance (5-10 cm) to loosen and remove the dirt.
At the same time rub and eliminate the dirt with a clean cloth. After this, treat the surface
with the brush to get a smooth finish.
7
LARGE cLEANING BRUSH (10 - 10A)
Cleaning hard floors
Stick the extension tube onto the spray pistol and attach the large cleaning brush to the
extension tube. Pass over the floor with even movements.
Pause a bit longer over joints and uneven places, to dissolve deeply-ingrained dirt. Repeat
several times if necessary.
Finally, clamp a dry wipe cloth around the brush and wipe the whole surface clean.
The floor will shine like new.
For linoleum, proceed carefully, using very little steam; or, better yet, use a dry wipe cloth
to retain the floor's natural brilliance.
Cleaning carpets with the brush cover
Using the DIAMANT, textile wall-to-wall carpets, rugs and even Persian carpets can be
cleaned and disinfected, eliminating even animal hair and house mites, without chemicals
and additives, restoring the original colour and providing renewed brilliance.
The elimination of deeply ingrained dirt and detergent residues left over from previous cle-
aning attempts may require several treatments for the best results.
For after-treatment, simply repeat the process, using a dry wipe cloth clamped over the
brush attachment.
For first-time cleaning following the process, use a vacuum cleaner only.
Slide the brush cover (10a) over the brush (10) and allow it to latch into place. This allows
the attachment to glide easily and smoothly over the floor, without damaging the carpeting,
aspirating away any dirt as a result of the steam vortex effect and resulting under-pressure
generated around the brushes by the brush cover.
8