Miller 028042103 Руководство пользователя - Страница 12

Просмотреть онлайн или скачать pdf Руководство пользователя для Сварочная система Miller 028042103. Miller 028042103 20 страниц.
Также для Miller 028042103: Руководство пользователя (20 страниц), Руководство пользователя (20 страниц), Руководство пользователя (20 страниц)

6-2. Coolant Maintenance

Disconnect cooler plug from welding power source receptacle before maintaining.

Dispose of used coolant according to national, state, and local codes. Do not pour down drain.

Changing Coolant

Drain coolant by tipping unit forward. Fill with clean water and run for 10 minutes. Drain and refill.

NOTICE − If replacing hoses, use hoses compatible with ethylene glycol, such as Buna-n, Neoprene, or Hypalon. oxy-acetylene hoses are

not compatible with any product containing ethylene glycol.

Contact Factory Authorized Service Agent to clean or change filter.

Trouble

Coolant system does not work.

Decreased or no coolant flow.

OM-254203 Page 8

Remedy

Be sure input power cord is plugged in to energized receptacle.

Check circuit breakers on cooler and welding power source, and reset if necessary.

Motor overheated. Unit starts running when motor has cooled.

Have Factory Authorized Service Agent check Power switch, capacitor, and motor.

Add coolant.

Check for clogged or damaged hoses.

Check in-line filter, clean if required.

Ref. coolmaint_2016-08