Miller Blue Thunder Series Руководство пользователя - Страница 12

Просмотреть онлайн или скачать pdf Руководство пользователя для Сварочная система Miller Blue Thunder Series. Miller Blue Thunder Series 36 страниц. Ce models

Печатать страницу

3-1. Serial Number And Rating Label Location

The serial number and rating information for this product is located on the back . Use rating label to determine input power requirements and/or rated

output. For future reference, write serial number in space provided on back cover of this manual.

3-2. Specifications

Do not use information in unit specifications table to determine electrical service requirements. See Sections4-5,4-6 and 4-7 for information on

connecting input power.

Ampere

Rated Welding

Range

Model

Output

220 A @

253

29 Volts DC,

30-220 A

35% Duty Cycle

320 A @

343

32.8 Volts DC,

50-320 A

35% Duty Cycle

400 A @

403

36 Volts DC,

60-400 A

35% Duty Cycle

420 A @

443

36.8 Volts DC,

60-420 A

45% Duty Cycle

3-3. Environmental Specifications

A. IP Rating

IP Rating

This equipment is designed for indoor use and is not intended to be used

or stored outside.

B. Information On Electromagnetic Fields (EMF)

This equipment shall not be used by the general public as the EMF limits for the general public might be exceeded during welding.

This equipment is built in accordance with EN 60974−1 and is intended to be used only in an occupational environment (where the general public

access is prohibited or regulated in such a way as to be similar to occupational use) by an expert or an instructed person.

Wire feeders and ancillary equipment (such as torches, liquid cooling systems and arc striking and stabilizing devices) as part of the welding

circuit may not be a major contributor to the EMF. See the Owner's Manuals for all components of the welding circuit for additional EMF exposure

information.

The EMF assessment on this equipment was conducted at 0.5 meter.

At a distance of 1 meter the EMF exposure values were less than 20% of the permissible values.

C. Information On Electromagnetic Compatibility (EMC)

This Class A equipment is not intended for use in residential locations where the electrical power is provided by the public low

voltage supply system. There can be potential difficulties in ensuring electromagnetic compatibility in those locations, due to con-

ducted as well as radiated disturbances.

This equipment does not comply with IEC 61000−3−12. If it is connected to a public low voltage system, it is the responsibility of the installer

or user of the equipment to ensure, by consultation with the distribution network operator if necessary, that the equipment can be connected.

IEC/TS 61000-3-4 can be used to guide parties concerned by the installation of arc welding equipment with an input current greater than 16 A

in a low voltage network.

OM-233 381 Page 8

SECTION 3 − SPECIFICATIONS

Max

Open-Circuit

50/60 Hz, Three-Phase

Voltage DC

230 V 380 V 400 V 520 V

59-66 V

36 A

68 V

55 A

66-73 V

73 A

78 V

80 A

IP22S

Amperes Input at

Rated Load Output,

KVA/KW

−−

21 A

−−

14.6/12

32 A

23 A

22/18

−−

42 A

−−

28/23

47 A

34 A

32/26

Operating Temperature Range

−10 to 40°C (14 to 104°F)

Dimensions (mm)

Weight

L x W x H

80 kg

980 x 410 x 650

105 kg

980 x 410 x 650

115 kg

980 x 410 x 650

175 kg

1150 x 520 x 730

IP22S 2014 − 06

ce-emf 1 2010-10

ce-emc 2 2014-07