Miller DIVERSION 180 w/Auto-Line Руководство пользователя - Страница 20
Просмотреть онлайн или скачать pdf Руководство пользователя для Сварочная система Miller DIVERSION 180 w/Auto-Line. Miller DIVERSION 180 w/Auto-Line 48 страниц. Wp - 17 torch
Также для Miller DIVERSION 180 w/Auto-Line: Руководство пользователя (40 страниц)
Печатать страницу
4-5.
Selecting Extension Cord (Use Shortest Cord Possible)
Single Phase AC
Input Voltage
115
230
*Conductor size is based on maximum 3% voltage drop
4-6. Connecting 230 Volts Input Power For Diversion 165 Models
Tools Needed:
OM-246 522 Page 16
4 (21.2)
6 (13.3)
Maximum Allowable Cord Length in ft (m)
160 (49)
107 (33)
471 (144)
321 (98)
1
6
3
4
9
1
10
L2
2
Conductor Size − AWG (mm
)*
8 (8.4)
71 (22)
215 (66)
=GND/PE Earth
Ground
8
5
7
L1
2
L2
L1
230 VAC, 1
10 (5.3)
12 (3.3)
47 (14)
29 (9)
146 (45)
90 (27)
!
Installation must meet all Na-
tional and Local Codes − have
only qualified persons make
this installation.
!
Always connect green or
green/yellow conductor
supply grounding terminal
first, and never to a line termi-
nal.
!
Special installation may be
required where gasoline or
volatile liquids are present −
see NEC Article 511 or CEC
Section 20.
1
Rating Label
Supply correct input power (see Sec-
tion 4-4).
2
Black And White Input
Conductor (L1 And L2)
3
Green Or Green/Yellow
Grounding Conductor
4
Input Power Cord.
5
Disconnect Device (switch
shown in the OFF position)
6
Disconnect Device Grounding
Terminal
7
Disconnect Device Line
Terminals
Connect green or green/yellow
grounding conductor to disconnect
device grounding terminal first.
Connect input conductors L1 and L2
to disconnect device line terminals.
8
Over-Current Protection
Select type and size of over-current
protection using Section 4-4 (fused
disconnect switch shown).
Close and secure door on disconnect
device. Remove lockout/tagout de-
vice, and place switch in the On posi-
tion.
9
Plug (NEMA 6-50P)
10 Receptacle (NEMA 6-50R)
(Customer Supplied)
Connect plug to receptacle.
Ref. 805 116-A
to