Miller XMT 450 CV Руководство пользователя - Страница 15
Просмотреть онлайн или скачать pdf Руководство пользователя для Сварочная система Miller XMT 450 CV. Miller XMT 450 CV 48 страниц. With arcreach
Печатать страницу
Keep flammables away from cutting. Do not cut near flammables.
Welding sparks can cause fires. Have a fire extinguisher nearby, and have a watchperson ready to use it.
Do not cut on drums or any closed containers.
Do not fuel a hot engine.
Do not fuel a hot engine.
Do not fuel a hot engine.
Welding sparks can cause fires. Have a fire extinguisher nearby, and have a watchperson ready to use
Welding sparks can cause fires. Have a fire extinguisher nearby, and have a watchperson ready to use it.
Cutting sparks can cause fires. Have a fire extinguisher nearby, and have a watchperson ready to use it.
it.
Do not grip material near cutting path.
Use lift eye to lift unit and properly installed accessories only, not gas cylinders. Do not exceed maximum lift eye
Use lift eye to lift unit and properly installed accessories only, not gas cylinders. Do not exceed maximum lift eye
Use lift eye to lift unit and properly installed accessories only, not gas cylinders. Do not exceed maximum lift eye
Cutting sparks can cause fires. Have a fire extinguisher nearby, and have a watchperson ready to use it.
rating (see Specifications).
rating (see Specifications).
Do not weld on drums or any closed containers.
Do not weld on drums or any closed containers.
rating (see Specifications).
Turn off power before disassembling torch.
Do not weld on drums or any closed containers.
When power is applied failed parts can explode or cause other parts to explode.
Do not cut on drums or any closed containers.
When power is applied failed parts can explode or cause other parts to explode.
When power is applied failed parts can explode or cause other parts to explode.
Do not remove or paint over (cover) the label.
Do not remove or paint over (cover) the label.
Writer: If necessary, replace the word "handle" with "lift eye'.
Do not cut on drums or any closed containers.
Flying pieces of parts can cause injury. Always wear a face shield when servicing unit.
Flying pieces of parts can cause injury. Always wear a face shield when servicing unit.
Do not use one handle to lift or support unit.
Do not grip material near cutting path.
Flying pieces of parts can cause injury. Always wear a face shield when servicing unit.
Flying pieces of parts can cause injury. Always wear a face shield when servicing unit.
Drive rolls can injure fingers.
Always wear long sleeves and button your collar when servicing unit.
Turn off power before disassembling torch.
Always wear long sleeves and button your collar when servicing unit.
Do not grip material near cutting path.
Always wear long sleeves and button your collar when servicing unit.
Always wear long sleeves and button your collar when servicing unit.
Welding wire and drive parts are at welding voltage during operation
Consult rating label for input power requirements.
After taking proper precautions as shown, connect power to unit.
Turn off power before disassembling torch.
After taking proper precautions as shown, connect power to unit.
After taking proper precautions as shown, connect power to unit.
After taking proper precautions as shown, connect power to unit.
Do not remove or paint over (cover) the label.
Become trained and read the instructions and labels before working on machine.
Writer: If necessary, replace the word "handle" with "lift eye'.
Disconnect input plug or power before working on machine.
Disconnect input plug or power before working on machine.
Do not remove or paint over (cover) the label.
Do not use one handle to lift or support unit.
Do not use one handle to lift or support unit.
Disconnect input plug or power before working on machine.
Connect Green Or Green/Yellow grounding conductor to ground terminal first.
Connect input conductors (L1, L2, L3) to line terminals.
Wear hat and safety glasses. Use ear protection and button shirt collar. Use welding helmet with cor-
Wear hat and safety glasses. Use ear protection and button shirt
rect shade of filter. Wear complete body protection made from leather or flame-resistant clothing
collar. Use welding helmet with correct shade of filter. Wear complete
Drive rolls can injure fingers.
(FRC). Body protection includes oil-free clothing such as leather gloves, heavy shirt, cuffless trousers,
body protection.
Keep your head out of the fumes
high shoes, and a cap.
Wear hat and safety glasses. Use ear protection and button shirt
Become trained and read the instructions before working on the
collar. Use welding helmet with correct shade of filter. Wear complete
Become trained and read the instructions before working on the machine or welding.
machine or welding.
body protection.
Welding wire and drive parts are at welding voltage during operation
Hazardous voltage remains on input capacitors after power is turned
Become trained and read the instructions before working on the
Hazardous voltage remains on input capacitors after power is turned off. Do not touch fully charged ca-
off. Do not touch fully charged capacitors. Always wait
machine or cutting.
Become trained and read the instructions before working on the
after power is turned off before working on unit, AND check input ca-
machine or welding.
pacitors. Always wait 60 seconds after power is turned off before working on unit, AND check input ca-
pacitor voltage, and be sure it is near 0 before touching any parts.
pacitor voltage, and be sure it is near 0 before touching any parts.
Remove unit from shipping crate. Remove Owner's Manual from unit.
Hazardous voltage remains on input capacitors after power is turned
Become trained and read the instructions before working on the
Follow instructions to install muffler.
off. Do not touch fully charged capacitors. Always wait
= < 60
machine or cutting.
power is turned off before working on unit, AND check input capacitor
voltage, and be sure it is near 0 before touching any parts.
Always lift and support unit using both handles. Keep angle of lifting device less than 60 degrees. Use
a proper cart to move unit.
= < 60
Every 100 hours, check and clean filter and check condition of hoses.
Always lift and support unit using both handles. Keep angle of lifting
Consult rating label for input power requirements.
device less than 60 degrees.
Use a proper cart to move unit.
During the first 50 hours of operation keep welding load above 200
amperes. Do not weld below 200 amperes of output.
Engine fuel plus flames or sparks can cause fire.
Remove unit from shipping crate. Remove Owner's Manual from unit.
After the first 50 hours of operation, change the engine oil and filter.
Follow instructions to install muffler.
Become trained and read the instructions and labels before working on machine.
Read Owner's Manual. Read labels on unit.
Wear dry insulating gloves. Do not touch electrode (wire) with bare hand. Do not wear wet or damaged gloves.
Move jumper links as shown on inside label to match input voltage at
Safe31 2017 04
Safe32 2012 05
keep hands and metal objects away.
Safe33 2017 04
Safe34 2012 05
Safe35 2012 05
Safe36 2012 05
Hazardous voltage remains on input capacitors after power is turned
off. Do not touch fully charged capacitors. Always wait
after power is turned off before working on unit, AND check input ca-
Safe38 2012 05
Safe7 2017 04
pacitor voltage, and be sure it is near 0 before touching any parts.
Safe39 2012 05
Safe40 2012 05
Hazardous voltage remains on input capacitors after power is turned
off. Do not touch fully charged capacitors. Always wait
60 seconds
power is turned off before working on unit, AND check input capacitor
voltage, and be sure it is near 0 before touching any parts.
Safe41 2012 05
Safe42 2017 04
Safe40 2012 05
5 minutes
after
Always lift and support unit using both handles. Keep angle of lifting
device less than 60 degrees.
Safe46 2012 05
Safe43 2017 04
Use a proper cart to move unit.
Safe41 2012 05
Safe51 2012 05
Safe44 2012 05
Engine fuel plus flames or sparks can cause fire.
Safe54 2017 04
Safe45 2012 05
Safe46 2012 05
Safe55 2012 05
Remove unit from shipping crate. Remove Owner's Manual from unit.
Follow instructions to install muffler.
Safe47 2012 05
Safe57 2017 04
60 seconds
Safe42 2017 04
keep hands and metal objects away.
5 minutes
after
Safe43 2017 04
Safe44 2012 05
OM-
Safe45 2012 05
Safe46 2012 05
Safe13 2012 05
Safe14 2012 05
Safe17 2017 04
Safe24 2017 04
Safe24 2017 04
Safe24 2017 04
Safe14 2012 05
Safe15 2012 05
Safe18 2017 10
Safe15 2012 05
Safe16 2017 04
Safe25 2012 05
Safe25 2012 05
Safe19 2012 05
Safe25 2012 05
Safe16 2017 04
Safe26 2012 05
Safe26 2012 05
Safe17 2017 04
Safe26 2012 05
Safe20 2017 04
OM-
Safe27 2012 05
Safe17 2017 04
Safe27 2012 05
Safe18 2017 10
Safe27 2012 05
Safe28 2012 05
Safe28 2012 05
Safe18 2017 10
Safe19 2012 05
Safe28 2012 05
Safe29 2012 05
Safe19 2012 05
Safe29 2012 05
Safe20 2017 04
Safe29 2012 05
OM-
Safe30 2012 05
Safe30 2012 05
Safe20 2017 04
Safe31 2017 04
Safe30 2012 05
OM-
OM-
OM-
OM-
Safe32 2012 05
Safe33 2017 04
Safe34 2012 05
OM-292663 Page 11
Safe35 2012 05