aquantica at2i Руководство по эксплуатации - Страница 2

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Аксессуары для фотоаппаратов aquantica at2i. aquantica at2i 16 страниц. For the canon t2i

Печатать страницу

FOREWORD

Thank you for having selected the AQUATICA Digital Camera Housing System for your underwater photography.

The AQUATICA Digital Housing is the result of a long and continuing relationship with the most demanding underwater

photographers in the world. Each housing is handcrafted, quality checked and pressure tested to a 300 feet equivalent by

a small group of specially trained individuals, each of whom takes the utmost pride and satisfaction in offering the best

underwater camera housing in the world.

The Aquatica Digital Housing was designed for optimum technical and optical performance and to provide easy and

efﬁcient underwater access to essantials functions and controls of the Canon T2i / 550D DSLR.

This manual assumes that the user is already familiar with the Canon T2i / 550D

camera. If not, please read the Canon

instruction manual before attempting to use the housing.

With basic care and maintenance, your AQUATICA housing will give you a lifetime of enjoyment and satisfaction in

producing underwater images.

Please read this manual carefully before using your housing for the ﬁrst time and note that: whenever cited the right hand

is your right when using the housing.

SAFETY PRECAUTIONS:

While operation of the Aquatica T2i is fairly straightforward, as with anything going underwater certain precautionnary measure should

be adressed in order to protect you investment, high above them is providing proper transportation and handling of this housing to pro-

tect it from potential damage which might cause a ﬂood or operational malfunction. So please read and follow the following precautions:

• Store and transport the housing in a sturdy, shock proof container and avoid travelling with the camera mounted inside the housing as

impact forces especially on the external push buttons will be transferred to the camera.

• When travelling by air, either remove the port or open the housing to prevent pressure built up inside the housing that could force ports

window to pop out or unseat O-ring seal.

• Never change a port or open the housing in a location where sand or similar foreign material might come in contact with an O-ring.

• Use of accessories or modiﬁcations and alterations unauthorized by the manufacturer may result in ﬂooding or poor functioning of the

controls.

• Be careful when opening the housing as the pressure buildup inside the housing will exaggerate the force of the latch spring. Keep

ﬁngers away from the path of the latches.

• Whenever changing ports or O-rings, perform a simple seal test with out the camera inside.

• Avoid scratching the acrylic or glass ports and windows.

• Make sure that all ports remain properly attached before rinsing the housing, especially when rinsing without a wired strobe make sure

the Bulkhead connector is sealed with its plug.

• Never attempt to operate the camera in autofocus mode if a focus gear is engaged on a non USM lens to the housing pinion gear.

• The main O-ring seals should be maintained and cleaned on a regular basis. Read and follow the Care and Maintenance section on

this manual.

• Ensure that the spring loaded secondary lock is properly engaged on the latches to prevent their accidental opening underwater.

page 1