Burkert 8791 Дополнительные инструкции - Страница 10

Просмотреть онлайн или скачать pdf Дополнительные инструкции для Позиционеры клапанов Burkert 8791. Burkert 8791 12 страниц. External position feedback option with inductive proximity switch
Также для Burkert 8791: Инструкция по сборке Руководство (16 страниц), Инструкция по сборке Руководство (16 страниц)

To install the electrical system using screw-type terminals and to

start up Type 8791 using DIP switches, remove the sheet metal

cover and the housing cover:

→ Unscrew screws (4 x) on the housing cover.

→ Remove sheet metal cover together with the screws and

spacer sleeves.

→ Remove housing cover and fold to the side.

→ Install or start up device.

After installing or starting up the device, mount sheet metal cover

and housing cover:

→ Close housing cover, ensuring that the seal is correctly fitted.

→ Attach sheet metal cover with screws and spacer sleeves

(see "Fig. 4").

→ Tighten screws (4 x) hand-tight as far as the stop.

english

Instructions on operation in the potentially explosive atmosphere

5.8

ATEX approval

The ATEX approval is only valid if the modules and components

authorized by Bürkert are used as described in these operating

instructions.

Use the devices only in combination with the valve types approved

by Bürkert, otherwise the ATEX approval will expire.

If any unauthorized changes are made to the system, modules or

components, the ATEX approval will also expire.

This product is subject to review by the Shanghai Inspection

and Testing Institute of Instruments and Automation Systems

Co., Ltd. (SITIIAS), has been CCC certified to comply with

requirements of national explosion-proof series standard (GB/T

3836.2021-Explosive Atmospheres).

The EU Type-Examination Certificate

BVS 16 ATEX E 118 X and

IECEx BVS 16.0091 X

was issued by

DEKRA EXAM GmbH

Dinnendahlstraße 9

D-44809 Bochum

Germany

Production is audited by the PTB (CE0102).

BVS 16 ATEX E 118 X