AquaOne HZS-700 Руководство по эксплуатации - Страница 8

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Водяной насос AquaOne HZS-700. AquaOne HZS-700 11 страниц. Swimming pool pump

Thanks for purchasing our water pumps. Please read this instruction

carefully before using and keep it weil for your future reference. We

decline responsibility for any damage caused by incorrect installation and

operation.

Features

1. Pump body, pump cover and impeller are made of high quality

plastic.

2. Big output, high lift, low noise.

3. Good mechanical seal and durable.

4. With over load protection to ensure lang lasting working.

5. With simple suction and discharge pipes.

Application

These water pumps are designed for the circulation and filtration of the

small swimming pools (family use), whirl pools and Sauna pools. Also

they are designed for the circulation and filtration of seafood in hotels,

restaurants and farms.

Caution

1. Installation

The electric installation and connection must be carried out by qualified

staff.

The pump should be installed vertically in a stable and dry place. Make

sure the pump is installed about 0.5-1.3m away from water edge, and

fixed on a stable ground with screw at least 6mm-8mm. Make sure the

pump is prevented from submerge and kept at a well-ventilated place.

Please add valves onto the suction and discharge pipes. Be sure the

pump is installed under water level or a emergency stop valve is fixed.

Due the dillerence height of installation and different type of pumps, seif

priming may last for 10 minutes.

2. Pipe Assembly

The suction and discharge pipes should have diameter equal to

or greater than that of the intake tapping of the pumps.

The suction pipes should be sealed to make sure the air can

not come in to the pump body.

The suction pipes should be installed aslant, so the air will not

stay in the pipes.

By Aquaristikwelt24

www.aquaristikwelt24.de

8 |

S e i t