AquaPix W1024 Splash Руководство - Страница 2
Просмотреть онлайн или скачать pdf Руководство для Цифровая камера AquaPix W1024 Splash. AquaPix W1024 Splash 3 страницы.
Также для AquaPix W1024 Splash: Руководство (3 страниц)
Печатать страницу
5.2
Inserting a memory card (not included)
This camera has no built-in internal memory. This memory can be gained with a micro SD
memory card (not included).
Follow the instructions below to insert the optional micro SD memory card into the camera.
1.
Turn off the camera first.
2.
Open the battery door.
3.
Insert the micro SD card into the camera.
Note: There is only one right direction to insert the micro SD memory card into the slot. Do not
force the card into the memory card-slot, it may damage both the camera and the micro
SD memory card.
Note: The micro SD memory card must be formatted before taking photographs. See the
following sections for more information.
5.3
Formatting the micro SD card
1.
Press the menu button (
) in PHOTO or VIDEO mode.
2.
Select the setup mode by pressing the right button.
W
3.
Select the format icon by pressing the
(
) button and press the SHUTTER button to
confirm.
4.
Press the SHUTTER button to format the SD memory card.
5.4
Setting the resolution
The camera can be set to different resolutions.
1.
Press the menu button (
) in PHOTO mode, select the resolutions icon by the
key and press the SHUTTER to confirm.
Resolutions: VGA (640 x 480), 3M (2048 x 1536),
5M (2592x1944), 10M (3648x2736);
16M (4608x3456)
2.
Five different resolutions will be displayed. Select the desired resolution by using the up or
down button and press the SHUTTER button to confirm the selection.
5.5
Taking photographs
1.
Turn on the camera.
2.
Depending on the distance to the object being photographed, use macro switch to adjust
the distance. Select the flower symbol (
) if you wish to take a close-up photograph
(11cm –18 cm).
If you wish to take a video or a photograph of surroundings or people (0.5m – infinity), set
the macro switch to normal mode (
).
3.
If you are not sure if there is enough lighting, turn on the automatic flash(
the flash button. (If the battery power is too low, the flash won't be activated).
4.
Use the LCD screen to aim at the object you wish to take photographs of.
5.
Press the SHUTTER button and wait until the LCD display turns on again.
Caution
1) Taking picture for fast-moving object is not recommended.
2) Image may be distorted when taking picture in a moving vehicle.
5.6
Zoom in and out
The camera can zoom in up to 4 times.
Zoom in or out by pressing the up or down button, a number will appear on the display, 4.x is the
maximum zoom ratio.
5.7
Self-timer setting
You can use the self-timer function when you take a photograph of yourself or when you take a
photograph without flash of an object. To avoid shaking of the camera a tripod is recommended.
1.
Set the camera to photo mode.
2.
Press the menu button (
). The menu will appear.
W
3.
Press the
(
) button to select Self Timer and confirm by pressing the SHUTTER
button.
W
4.
Press the
(
) button to select the "On" option
5.
Press the SHUTTER button to confirm. The self-timer function is now ready for use.
6.
Aim at the object you wish to take photos of.
7.
Press the SHUTTER button to take a photograph.
8.
The photo will be taken after the timer reaches the delay time of 10 seconds. The camera
will beep during the delay time.
5.8
Recording video clips
1.
Press the mode button to select the video clip mode (
2.
For setting the resolution, Press the menu (
the SHUTTER button to confirm. Two resolutions will be displayed.
VGA (640 x 480), QVGA ( 320 x 240).
3.
Press the SHUTTER button to start recording videos, press the right button to pause and
press the SHUTTER button again to stop recording. The video clip will now be saved as an
AVI file in the camera memory.
5.9
Playback photographs
1.
Press the(
) button to get into playback mode.
2.
The last picture or video clip taken will be displayed. Press the W(
thumbnail mode. Press the Left /Right /Up /Down button to select the desired picture, and
press the Shutter button to view.
3.
In full screen display, press the
4.
To shift the image in zoom-in mode, press the SHUTTER button and then use the
mode/menu/left/right buttons.
5.
Press the menu(
) button in Playback mode, press again and hold the menu button until
the menu options displayed. Select SLIDE SHOW and set up the desired slide show way.
Press the SHUTTER button to confirm. The pictures saved in the micro SD card will be
displayed in sequence automatically. To stop slide show, press the menu button.
6.
Press the menu (
) button in Playback mode, press again and hold the menu button until
the menu options displayed. Select Photo Effect and press the SHUTTER button. Select
the desired effect by pressing the up/down button and press the shutter button to confirm.
The image will be saved as a separate image.
5.10
Protecting photographs/ videos
You can prevent the photographs/videos in the micro SD card from accidental erasure.
Follow the instructions below to protect photographs/videos.
1.
Press the (
) button to get into Photo playback mode.
2.
Press the left or right button to select the photograph/video clip to be protected.
3.
Press the menu (
) button in Playback mode, press it again and hold the menu button
until the menu options displayed. Select Protect and press the SHUTTER button
4.
Select "Protect single" or "All" and press the Shutter button to confirm.
W
(
)
5.11
Resizing photographs
A captured image can be resized to a smaller size and saved as a separate image.
Follow the instructions below to resize photographs.
1.
Press the (
) button to get into Photo playback mode.
2.
Press the left or right button to select the photograph to be resized.
3.
Press the menu (
) button in Playback mode, press again and hold the menu button until
the menu options displayed. Select Resize and press the SHUTTER button to select the
new image size.
4.
Select the new size and press the SHUTTER button to conform. The image will be saved
as a separate image.
5.12
Playback video clips
1.
When video clips are displayed, press the up button to start playing the video and press the
up button again to pause the playback.
) by pressing
2.
Press the right button to fast forward or press the left button to rewind.
3.
Press the mode button to stop and exit .
5.13
Deleting photographs and video clips
You can delete a single photograph / video clip, or delete all the photographs / video clips in the
memory.
Follow the instructions below to delete photographs.
1.
Press the (
) button to enter the playback mode.
2.
Press the left or right button to select photograph/video clip to be deleted.
3.
Press the menu/delete button
4.
Press the SHUTTER button to confirm.
5.
Press the menu button to exit.
NOTE: Select "All" and Press the SHUTTER button to confirm, all the pictures and videos will be
deleted.
Photos that are protected from accidental delete cannot be deleted. To delete photos, set
photos to unprotect mode(Section 5.10), and then follow the file delete procedure.
6.
Connecting to a PC
The unit can be connected to the computer as mass storage device and transfer photo/video files
for storage.
).
) button and select Resolution, then press
) to get into the
T
(
) button to zoom in the photo.
and select "Delete This Image(Video)" or "All" .
7.
Specifications
Sensor
10.0 Mega pixel CMOS sensor
16.0 Mega pixels: (4608x3456)
10.0 Mega pixels: (3648x2736)
Image resolution
5.0 Mega pixels: (2592x1944)
3.0 Mega pixels: (2048x1536)
VGA: (640x480)
Lens
F/2.8 f = 8.5mm
Focus range
0.5m. ~ Infinity
Macro mode
11cm – 18cm
Digital zoom
4x
Flash strobe
Built-in ( Auto / force / off )
LCD display
2.4" TFT color display
White balance
Auto / Daylight / Cloudy / Fluorescent / Tungsten
Video mode
30fps@VGA / 30fps@QVGA with micro SD card
External memory card
Supports micro SD cards up to 32GB
File format
Picture: JPEG, Video: AVI
10 seconds
Self timer
PC interface
USB 2.0
Power source
2 x AAA alkaline batteries
8.
System requirement
Win XP (SP3) Vista32/64 Win7 32/64 and Mac OS X 10.6.8
Operating system
or above
CPU
Pentium 4 / 3.0G or faster recommended
RAM
1 GB MB RAM (Vista : 2 GB)
Interface
USB port
CD
CD ROM Driver
9.
Troubleshooting
Problem
Cause
Cannot turn on the camera
Low battery power.
Battery placed at wrong
polarities.
Photos can not be saved
The memory card hasn't
when taking pictures.
been formatted properly.
Cannot find removable disk
Connection failure.
after connecting the
.
camera to the computer
Flash does not work.
Battery power is too low.
The batteries used up very
Incorrect or old, used up,
fast.
battery
The photos are blurry
1. The camera is not held
steadily
2. The lens of camera is
dirty.
Before using your camera in the water please verify that all lids and locks are tightly closed and sealed.
After using the camera in water please let it dry.
The camera should not be exposed to high temperatures and humidity differences to avoid condensation
behind the lens.
Open the battery compartment only when the camera is dry.
Solution
Replace or install the battery
correctly.
Format the memory in setup
mode of the camera. Please
refer to section 5.3.
Make sure all cable connections
are secured and restart the
computer if necessary.
Replace with new 2 x AAA
alkaline batteries
Replace with 2 x AAA alkaline
batteries
1. Hold the camera steadily until
it beeps when taking video
photo.
2. Clean the lens with soft dry
cloth.