Chromcraft HCU 38 Руководство по эксплуатации - Страница 12
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Внутренняя отделка Chromcraft HCU 38. Chromcraft HCU 38 14 страниц.
Печатать страницуHCU #38 for 4 motor system – JK35-2T with JK1158 headrest & lumbar
ELECTRICAL CONNECTIONS AND PARTS:
Step 1
- plug hand controller wire to control box. Match #1 to #1.
Step 2
- plug the black wire from the wire of main motor #2 to the control box marked #2.
Step 3
- plug the blue wire from the wire of sub motor #3 to the control box marked #3.
Step 4
- plug the power cord into the power adaptor from the control box.
Step 5
- plug headrest motor black wire to black wire connector from control box. Then
plug lumbar blue wire to blue wire connector from control box. These two wires come from
same opening of control box to easily identify.
Step 6
– then plug into wall outlet with the transformer low voltage plug.
Put HCU in center of seat &
pull down into the center
back before back rest is
applied and locked down.
Step 2
Step 3
Step 1
Unwind
94"
Hand controller unit-
long
HCU #38
Note: match up color
coded wires of blue and
black with its connectors.
Control
box
Step 4
43"
Step 5
long
Power
adaptor
with back up
battery then
plug into
wall outlet
with the
transformer
low voltage
plug
Step 6
8 foot long
12