AQUAPURE Ozone Technology WPOZ2.0-E3 Руководство пользователя - Страница 6

Просмотреть онлайн или скачать pdf Руководство пользователя для Очиститель воздуха AQUAPURE Ozone Technology WPOZ2.0-E3. AQUAPURE Ozone Technology WPOZ2.0-E3 7 страниц.

Печатать страницу

System Set Up

1. Turn on the water valve/faucet. Check the connections to ensure that there is no leakage or

dripping. Tighten the hose connections, if necessary, but DO NOT over tight.

2. Connect power adapter, and then start your washer. Once the water begins to flow, the blue light

of Commercial Ozone Water Purifier should begin to glow.

Indicators

There are two states of the LCD control panel screen.

Blue Light: work normally.

Red Light: work abnormally or break down.

If the unit works abnormally, please contact our Customer Service.

Alarm of Leakage

Commercial Ozone Water Purifier is equipped with a switch and an alarm against leakage. If the

leakage happens, the water will accumulate on the bottom panel inside the unit. The sensor will set

off an audible alarm and will automatically turn the unit off. This alarm will continue to buzz until

the leak is stopped and/or the unit is unplugged. If this alarm should occur, you should unplug the

unit, turn off the cold water valve and call our Customer Service team for support.