Burmester 150 Руководство по эксплуатации - Страница 6

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Медиаплеер Burmester 150. Burmester 150 16 страниц.

Important Safety InformatIon

Important Safety Information

Do not open the device. The device does not contain any parts that can be maintained

by the user. Fuses inside the device may only be replaced by authorized staff, such as

your specialist dealer.

A defect fuse may render the device inoperative, meaning the device does not turn on

even though a power supply is present. When the power plug is connected and the

mains switch is on, a lethal voltage is present after opening the fuse holder inside the

fuse compartment. The fuses (F1, F2) are located inside the device and may only be

replaced by a qualified professional.

Use the supplied 3-lead power cord for the AC connection. The protective ground lead

must not be eliminated. Furthermore, the device may only be connected to a grounded

AC outlet.

The Network Player has a power supply unit that automatically adjusts to the available

power supply. As a result, the device can be operated with all common household

currents. String the power cord in a way that prevents it from being damaged. If a

power cord does get damaged we recommend switching the device off and contacting

your audio dealer.

Disconnecting the device from the power supply

To disconnect the Network Player from the power supply completely, use the easy-to

access mains switch on the rear panel.

When selecting an installation location, please observe the following:

• Avoid direct sunlight, excessive heat, cold, moisture, and dust.

• Ensure sufficient ventilation. Do not place the device in a closed rack.

• Do not cover the slots and openings on the device. They serve as a means of

ventilation.

• Do not expose the device to dripping water or spray water and do not place any

containers holding liquids on your device. Do not place any open ignition sources,

such as burning candles, on the device.

During thunder and lightning storms, disconnect the device from the power supply by

unplugging the power cord from the unit or from the power socket. Switching off the

mains switch on the rear panel of the device is not sufficient. For good measure, also

disconnect all other components from the power supply.