Diamond EFP/66R-M Руководство по эксплуатации, использованию и техническому обслуживанию - Страница 12
Просмотреть онлайн или скачать pdf Руководство по эксплуатации, использованию и техническому обслуживанию для Печь Diamond EFP/66R-M. Diamond EFP/66R-M 12 страниц. Electric oven
Также для Diamond EFP/66R-M: Руководство по эксплуатации, использованию и техническому обслуживанию (12 страниц)
Печатать страницу
8 POSSIBLE ANOMALIES, ALARMS AND ERRORS
Anomalies
The oven does not heat even though the
temperatures are set correctly.
The pilot lights are off.
The oven doesn't heat despite the main switch
is on (position 1) and the temperatures are
correctly set. The function pilot lights of the
heating elements are off.
The analogical thermometer doesn't notice the
increase of the temperature despite the heating
elements are correctly functioning
Inner light bulb does not switch on
Inner light bulb does not switch on
Inner light bulb does not switch on
The door is closed, but fume comes out
The baking chamber does not heat suitably
The baking chamber does not heat suitably in
spite of the temperature being set rightly
The temperature continues going up over the
set by thermostats
9 INFORMATION FOR DEMOLITION AND DISPOSAL
Pursuant to Art. 13 of Legislative Decree No. 151 of 25 July 2005, "Implementation of Directives 2002/95/EC,
2002/96/EC, and 2003/108/EC, concerning the reduction of the use of hazardous substances in electrical and
electronic equipment, as well as the disposal of some waste."
The crossed bin symbol on the appliance or its packaging indicates that the product must be collected separately from other
waste at the end of its service life.
The collection of this equipment at the end of its life is organised and managed by the manufacturer. Any user who wishes to
dispose of the equipment must therefore contact the manufacturer and follow the manufacturer-adopted procedure to allow
for the separate collection of the equipment at the end of its life.
Appropriate separate collection in order to recycle, process and dispose of the disassembled equipment helps avoid possible
negative effects on the environment and health, and promotes the reuse and/or recycling of the equipment materials. The
unlawful disposal of the product results in the application of administrative sanctions provided for by the applicable law.
Enrolled on the National Register of EEE Manufacturers, under entry No: IT08020000000645
WORKING ANOMALIES
Possible Causes
Main switch in position "0"
No electric Energy in the net
Analogical thermometer defect
Burned inner light bulb
Inner light bulb switch defected
No electric supply power on the light
Exhauster butterfly valve closed
The set temperature are too low
One or more heating elements are
defected
Thermostat probe or thermostat
contacts defected
bulb
Solutions
Turn the main switch in
position "1"
Check the general
contactor, the socket,
the plug, and the supply
cable.
Check and if necessary
replace the
thermometer
Replace inner light bulb
Replace light bulb
switch
Check electric
connection with the light
bulb
Open more the valve
and check the right
functioning.
Set the right
temperature
Replace the defecate
heating elements
Check and if necessary
replace the thermostat/s
22