Aquasana AQ-PWFS-RB1 Инструкция по применению - Страница 2
Просмотреть онлайн или скачать pdf Инструкция по применению для Системы фильтрации воды Aquasana AQ-PWFS-RB1. Aquasana AQ-PWFS-RB1 3 страницы. Powered water filtration system
Также для Aquasana AQ-PWFS-RB1: Инструкции по настройке (5 страниц)
Печатать страницу
1.
Remove pitcher or dispenser from filtration dock.
2.
With filtration dock facing forward, open top cover by rotating it
a quarter-turn, counterclockwise, until the top cover lifts off the
filtration dock.
(figure A)
3.
Remove used cartridge from top cover by pulling down on the
cartridge or by removing it from the sump.
4.
Drop the new filter cartridge into the opening on the dock with
the o-rings facing up.
(figure C)
5.
After dropping the cartridge into the dock opening you must
push the reset button located on the top of the dock; this will
reset the lights on the system.
6.
Next place the top cover on the dock, pressing firmly, rotate the
top cover a quarter-turn clockwise until fully locked in. Ensure
both tabs of the top cover are aligned with the dock.
7.
Once the cartridge has been replaced and the top cover is fully
locked into filtration dock, place pitcher or dispenser back onto
filtration dock.
8.
Cartridge will need to be flushed 1 cycle to remove carbon fines.
(1 pitcher or 1 dispenser)
(figure B)
(figure D)
(figure D)
Figure A
Figure B
Figure C
Figure D
(reset)