Aquasana EQ-AST-WH-C Руководство пользователя - Страница 4
Просмотреть онлайн или скачать pdf Руководство пользователя для Системы фильтрации воды Aquasana EQ-AST-WH-C. Aquasana EQ-AST-WH-C 12 страниц. Whole house salt-free water conditioner
Также для Aquasana EQ-AST-WH-C: Инструкции по установке (5 страниц), Руководство пользователя (12 страниц)
Печатать страницу
2
SYSTEM CONFIGURATION
2
If you have added components to your Salt-Free Water Conditioner,
(Installation shown below includes Professional Grade Install Kit)
10" Pre-Filter
20" Pre-Filter
(Optional)
Salt-Free Water
Conditioner
Before installing
• Lay out system in appropriate configuration. Improper sequence
of equipment will affect performance, and could possibly damage
your system.
• For all installations: Anticipate the need for additional parts and pieces
including but not limited to pex tubing, clamps and mounting screws to
install unit properly (available at a local home improvement stores or
through your plumbing contractor). Due to the varieties of home design,
not all configurations can be addressed in this guide.
• DO NOT install this water conditioner where the line pressure may
exceed 100 psi. The operating pressure range for this filter is between
20psi – 100psi.
• Install on cold water lines only (40° – 90°F).
• Installation of the water conditioner must comply with existing state and
local plumbing codes. Aquasana and its manufacturer are not liable for
consequential or incidental damages due to improper installation.
• DO NOT install the unit on its side. It must be installed upright
to maximize contact with media bed.
note the correct sequencing below.
10" Post-Filter
(Optional)
Rhino
Water
®
Filter System
(Optional)
UV Filter
(Optional)