Aquasana EQ-FE20 Руководство пользователя - Страница 8

Просмотреть онлайн или скачать pdf Руководство пользователя для Системы фильтрации воды Aquasana EQ-FE20. Aquasana EQ-FE20 16 страниц. Whole house water filter iron filter

Печатать страницу

INSTALLATION STEPS

Filtration System Add-Ons Preparation

If you've added any additional components to your filtration system,

stop now and read the separate, individual manuals for those systems

in their entirety.

When installing on metallic plumbing, ensure you take the following

precautions. Securely install two (2) grounding clamps and a #4 copper

wire (not included) across the location where the system will be installed.

Tightly clamp at both ends, as shown in the illustration.

Ground

Clamp

ELECTRICAL SHOCK HAZARD

Prior to installation on metallic plumbing, securely install two grounding clamps and a #4 copper wire

per installation instructions. Failure to follow these instructions can result in death or electric shock.

Cut Pipes

1. Using a pipe cutter, cut into the main water supply line along the

marked sections from step 2 to install the shut-off valve and clean ends

of pipe. Ensure there are no burrs, sharp edges, or deep scratches. Cut

tubing as straight as possible with a utility knife, or an appropriate pipe

cutter for copper tubing or PVC.

2. If you are installing a bypass loop, now is the time to plan accordingly

and install (recommended, not included).

3. Loosely fit shut-off valve to calculate proper spacing of components.

NOTE: DO NOT cut more pipe than

necessary. You can cut more pipe

later if needed.

COPPER PIPES ONLY (proceed to Step 5 for PVC Pipes)

Ground Wire

WARNING

Ground

Clamp