Diamond FE-60 EL Руководство - Страница 5

Просмотреть онлайн или скачать pdf Руководство для Фритюрница Diamond FE-60 EL. Diamond FE-60 EL 12 страниц.

PACKING AND DEVICE CHECK

The device leaves our stocks properly packed with appropriate symbols and labels. There are

also appropriate instructions for use. In case the packing shows bad handling or damage, it

must be reclaimed at transporter immediately by writing and signing of a damage protocol.

• this instructing guide must be read properly and carefuly because it

important information about safety elements, instalation, use

• these recommendations refer to this product

• this product corresponds with valid standards

• this guide must be properly deposited for future use

• keep the children away from manipulation with the product

• when selling or moving the product to another place it is necessary to make yourself

sure that the staff or the professional service has got acquainted with control and

instalation instructions from enclosed guide

• only authorised person can operate the product

• can be use only for frying food

• it cannot be switched on without supervision

• we recommend to have the product checked by proffesional service min. once a year

• only original spare parts can be used for repairs

• the product cannot be cleaned by the water jet or pressure shower

• by damage or break down disconnect all the feeders (water, gas, electricity) and call

proffesional service

• producer refuses any responsibility in case of damages caused by wrong instalation, by

disobserving of above mentioned recom mendations or by other use etc.

TECHNICAL INSTRUCTIONS FOR INSTALATION AND REGULATION

Can be used ONLY by specialized technicians. following instructions apply to the technician

specialized in instalation to do all the operations in the most correct way and according to the

valid standards.

Important

Any activity connected with regulation etc. must be done only when the device is

disconnected from electricity. If it is necessary to have the device connected to the electricity

(during repairs) you must be very careful.

PLACEMENT

The device must be instalated in well ventilated room what is necessaryfor regulation of the

function of the device (technician must go by valid standard ( SN....). If the device is situated

close to the wall or if it is in contact with the furniture walls, these walls must resist the

temperatures ranging to 60°C. Instalation, setting, putting into operation must be done by

qualified person who is competent for this and according to the valid standards.

contains