Diamond RFE 12 Инструкции по эксплуатации и установке - Страница 6

Просмотреть онлайн или скачать pdf Инструкции по эксплуатации и установке для Фритюрница Diamond RFE 12. Diamond RFE 12 13 страниц.

It is equipped with a stainless steel container, with a cold zone insuring a longer using of the

oil. Indeed, the scraps are going to lay down the bottom of the container, where the oil tem-

perature is at the minimum, and do not carbonize. The draining is safe thanks to the tap

placed on the front of the fryer.

The setting of the temperature is made by the thermostat/commutator.

To turn on your fryer and preheat the oil, set the thermostat control knob (n°3 on picture) on

the desired heating power. The orange pilot light (n°1 on picture) ignites until the desired

temperature is reached.

Thermostatic pilot light

Thermostat

V FUNCTIONING / MANIPULATION

a) Installation / assembly:

- Unpack carefully the device of its packaging.

- Remove the protective film around the machine.

- Screw up the handle on the lid.

- Place the fryer on a plane and heatproof surface.

- Never place the device near a wall or near a partition makes of combustible materials even

if it is very well isolated.

- A distance of minimum 10 cm with the partition or the wall is necessary.

- Place the product to enable easy access to the plug.

- Then place all the accessories.

- Keep the lid near the fryer to enable you covering it after use or in case of fire.

On/off pilot light

Commutator