Panasonic AG-CX350 Руководство - Страница 19

Просмотреть онлайн или скачать pdf Руководство для Видеокамера Panasonic AG-CX350. Panasonic AG-CX350 21 страница. How to connect with youtube live
Также для Panasonic AG-CX350: Руководство (24 страниц), Как подключиться (8 страниц)

Panasonic AG-CX350 Руководство

Zoom + Focus

Please notice if a Zoom in/out adjustment have been initiated on a SKAARHOJ controller and one try to
zoom directly on the lens this will overrule Zooming from the SKAARHOJ controller.
If a Focus near/far adjustments have been initiated on a SKAARHOJ controller and one try to focus directly
on the lens this will overrule Focus adjustments from the SKAARHOJ controller.
This is a table of actions for some of the actions in the Panasonic CX350 Device Core (noted with EVA1
actions but principle is the same)
Zoom (Creep)
Zoom (Step)
Zoom (Fine)
Zoom (Binary)
Focus (Creep)
SKAARHOJ DEVICE CORES
Initiates a Creep Zoom in/out with speeds between -8 to +8
Binary triggers: Will only reflect the speed of the Creep Zoom value (-8
to +8)
Pulse inputs: Will cycle between -8 to +8. When -8 Creep Zoom out is at
the highest speed. When +8 Creep Zoom in is at the highest speed.
When 0 no zoom is initiated.
Displays: "Creep Zm/Speed of zoom"
Zoom in/out with steps defined to a specific value. Used to quickly zoom
to a desired range
Binary triggers: Will only reflect the current zoom value in mm
Pulse inputs: Will zoom in/out with the given speed value
Speed Limit 1: Small steps
Speed Limit 8: Large steps
Displays: "Step Zm/Zoom range in mm"
Zoom in/out with small steps to a specific value zoom range
Binary triggers: Will only reflect the current zoom value in mm
Pulse inputs: Will zoom in/out in small steps to set a specific zoom
range. Only recommended to use for very small adjustments. Reacts
slow if turned multiple times
Displays: "Fine Zm/Zoom range in mm"
Used to zoom in/out via buttons instead of a encoder
Binary triggers: Zoom in/out as long as a button is pressed and held
down. Speed of the zoom is determined with the speed limiter.
Pulse inputs: Not implemented
Displays: "Zoom/[Out,In]"
Initiates a Creep Focus far/nearer with speeds between -6 to +6
Binary triggers: Will only reflect the speed of the Creep Focus value (-6
to +6)
Pulse inputs: Will cycle between -6 to +6. When -6 Creep Focus near is
at the highest speed. When +6 Creep Focus far is at the highest speed.
When 0 no zoom is initiated.
Displays: "Creep Fcs/Speed of focus"
19