AquaScape AQUABASIN Series Инструкции и обслуживание - Страница 2

Просмотреть онлайн или скачать pdf Инструкции и обслуживание для Открытый фонтан AquaScape AQUABASIN Series. AquaScape AQUABASIN Series 2 страницы. Mini fountain kits

Печатать страницу

Instructions

STEP 1

• Assemble the AquaBasin

Then, set the basin in your desired location for the fountain

(Ex. 1).

STEP 2

• Using a can of brightly-colored spray paint, trace around

the basin to outline the area. Then, using the traced

area as a guide, dig the hole roughly 1" deeper than the

AquaBasin

Mini (Ex. 2).

STEP 3

• Set the Aquabasin

in the excavation and use a level to make

sure it is level from side-to-side and front-to-back (Ex. 3).

NOTE: If needed, a compacted material, such as sand, can

be used to provide an appropriate base for the basin.

STEP 4

• Thoroughly backfill the sides of the excavation with sand or

dirt to prevent any future shifting of the basin (Ex. 4). Then,

set the fountain on the AquaBasin

STEP 5

• Connect the tubing/pipe to the included water pump and

submerge the water pump in the basin (Ex. 5).

STEP 6

• Add a layer of decorative pebbles to cover the basin, then

fill the basin using a garden hose or other clean water

source (Ex. 6).

STEP 7

• Plug the pump into a ground fault circuit interrupter (GFCI)

rated receptacle and enjoy (Ex. 7).

Winterization

• In areas subject to freezing temperatures, the basin should

be drained and the fountain stored indoors or in a frost-free

location.

For more information about our company or products, please visit our website at aquascapeinc.com

#00000 • 02/18

Mini by screwing the lid together.

Mini.

or call us at US (866) 877-6637or CAN (866) 766-3426

☎

US (866)877-6637 |

☎

CAN (866)766-3426 | aquascapeinc.com

Ex. 1

Ex. 3

Ex. 5

Ex. 2

Ex. 4

Ex. 6

Ex. 7