AquaScape 82001 Инструкции по установке

Просмотреть онлайн или скачать pdf Инструкции по установке для Системы фильтрации воды AquaScape 82001. AquaScape 82001 2 страницы. Smart control plug

Печатать страницу

I N S T A L L A T I O N

SMART CONTROL

PLUG

Smart Control Plug

Item #82001

No.

Required

• Adequate Wi-Fi coverage reaching to the unit (2.4 GHz networks

supported)

• Aquascape Smart Control App (available on iOS or Android App Store)

Safety Information

WARNING: It is recommended whenever working in or near water to

have all electrical devices plugged into a ground fault circuit interrupter

(GFCI) that has been installed by a licensed electrician.

• The power cable should be protected at all times to avoid punctures,

cuts, bruises, and abrasion.

• Operating the Smart Control Plug outside of the 1500 watt (1000 watt

per plug) operating range voids the product warranty and may damage

or shorten the life of the unit.

IMPORTANT: Aquascape, Inc. is not responsible for losses, injury,

or death resulting from a failure to observe these safety precautions,

misuse, or abuse of pumps or equipment.

Installation

PAIRING PROCEDURE

• Plug the Smart Control Plug into an outdoor-rated

GFCI or indoor power source, and the unit will

automatically enter pairing mode.

NOTE: The blinking blue light on the face of the

unit indicates the plug is in pairing mode and

ready to be connected.

• Download the Aquascape Smart Control App

(available on iOS or Android App Store).

• Open the Aquascape Smart Control App and click

'Create New Account' (Ex. 1).

NOTE: If you already have an account, login with

your username and password.

facebook.com/aquascapeinc

youtube.com/aquascape4

pinterest.com/aquascapeinc

Contents - #82001

Description

Smart Control Plug

Ex. 1

I N S T R U C T I O N S

• Once logged in, click the three

dashes in the upper, right-hand

corner of the home screen (Ex. 2).

• Click 'Add New Device' (Ex. 3).

• Enter the Wi-Fi network and

password for the network to which

the unit will connect (Ex. 4).

NOTE: Adequate Wi-Fi coverage

is required (2.4 GHz networks

supported)

• Continue to follow on screen

instructions to complete the pairing

process.

• To reset the device to factory

defaults, press and hold the pairing

button for ten seconds and release

when the light begins rapidly

flashing (Ex. 5).

Troubleshooting

• Device won't pair

– Make sure the outlet is receiving power

– Make sure you have adequate wireless coverage to connect the

device (2.4 GHz networks supported)

– Reset the device to factory defaults

– Make sure the ground-fault circuit interrupter (GFCI) is not tripped

Warranty Information

3 YEAR WARRANTY

Aquascape Smart Control Plug is guaranteed for three years from

date of purchase. Proof of purchase required. Warranty does not

cover damage resulting from negligent handling, misuse or lack

of care. Warranty is valid against defects due to material and

workmanship only. Products returned must be cleaned, sanitized,

or decontaminated, as necessary, prior to shipment to ensure

that employees will not be exposed to health hazards in handling

said material. All applicable laws and regulations shall apply. The

sole obligation shall be to replace the defective unit with a suitable

replacement unit. Units should be checked for proper operation

prior to returning as defective. No liability for loss or damage of any

nature or kind, whether arising out of or from the use of the product,

whether defective or not defective, is assumed by Aquascape, Inc.

or it's affiliates.

For more information about our company or products, please visit our website at

aquascapeinc.com or call us at US (866) 877-6637 CAN (866) 766-3426

Ex. 2

Ex. 3

Ex. 4

Ex. 5

10/19