Diamond HD1412/P Руководство по установке, эксплуатации и техническому обслуживанию - Страница 3
Просмотреть онлайн или скачать pdf Руководство по установке, эксплуатации и техническому обслуживанию для Морозильная камера Diamond HD1412/P. Diamond HD1412/P 9 страниц.
Печатать страницуINSTALLATION
1
1.0 LOCATION
The cabinet must not be tilted. If necessary, some models may be tilted
to the side indicated on the packaging. If not, it cannot be tilted. You
must wait for at least 2 minutes from standing the cabinet up before
starting it up.
Remove the packaging except the support pallet. A forklift truck or pallet
truck can be used to move it to its installation site, lifting the
refrigerated cabinet making sure that it is not unbalanced.
The cabinet must not be dragged over the floor.
The area where the cabinet is positioned must be clear and clean,
preventing the refrigerator equipment's fan from absorbing materials
that are subsequently then deposited on the condenser's ribbing,
reducing system efficiency.
Remove the pallet, taking care not to knock the unit. The cabinet can
now be levelled, screwing in or unscrewing the legs. When it is levelled,
the protection film can be removed from the stainless steel using a blunt
object, and not a cutter as it could scratch the steel.
There must be a gap of 50 mm at the back and 30 mm at the sides of the cabinet when it has been
permanently installed.
A: LEG BODY
B SCREW
Turn clockwise to lower the unit
Turn anticlockwise to raise the unit
2