Panasonic WV-SF342 Руководство по установке - Страница 28

Просмотреть онлайн или скачать pdf Руководство по установке для Видеокамера Panasonic WV-SF342. Panasonic WV-SF342 48 страниц. Ip video cameras
Также для Panasonic WV-SF342: Технические характеристики (2 страниц), Руководство по установке (44 страниц), Характеристики и спецификации (2 страниц), Примечание по интеграции (8 страниц)

Important:

• Be sure to use the power cord plug provided with this product.

• Be sure to fully insert the power cord plug (accessory) into the 12 V DC power supply terminal.

Otherwise, it may damage the camera or cause malfunction.

• Be sure to use an AC adaptor compliant with the Specifications regarding power source and

power consumption. (☞ Page 43)

t Run the 12 V DC output cable through the gap of the cable hook.

When using PoE (IEEE802.3af compliant)

Connect a LAN cable (category 5 or better, straight, STP*) between a PoE device (such as a hub)

and the network connector of the camera.

* PAL models only

Important:

• Use all 4 pairs (8 pins) of the LAN cable.

• The maximum cable length is 100 m {328 feet}.

• Make sure that the PoE device in use is compliant with IEEE802.3af standard.

• When connecting both the 12 V DC power supply and the PoE device for power supply, PoE

will be used for power supply.

• When disconnecting the LAN cable once, reconnect the cable after around 2 seconds. When

the cable is quickly connected, the power may not be supplied from the PoE device.

12 V DC output cable

Cable hook