Panasonic CT-2022HBCF Руководство по эксплуатации - Страница 3

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для ТЕЛЕВИЗОР Panasonic CT-2022HBCF. Panasonic CT-2022HBCF 28 страниц.

About lead free solder (PbF)

Note: Lead is listed as (Pb) in the periodic table of elements.

In the information below, Pb will refer to Lead solder, and PbF will refer to Lead Free Solder.

The Lead Free Solder used in our manufacturing process and discussed below is (Sn+Ag+Cu).

That is Tin (Sn), Silver (Ag) and copper (Cu) although other types are available.

This model uses Pb Free solder in it's manufacture due to environmental conservation issues. For

service and repair work, we'd suggest the use of Pb free solder as well, although Pb solder may be

used.

PCBs manufactured using lead free solder will have the "PbF" or a leaf symbol

back of PCB.

Caution

• Pb free solder has a higher melting point than standard solder. Typically the melting

point is 50 ~ 70 °F (30 ~ 40 °C) higher. Please use a high temperature soldering iron

and set it to 700 ± 20 °F (370 ± 10 °C).

• Pb free solder will tend to splash when heated too high (about 1100 °F or 600 °C).

If you must use Pb solder, please completely remove all of the Pb free solder on the

pins or solder area before applying Pb solder. If this is not practical, be sure to heat the

Pb free solder until it melts, before applying Pb solder.

• After applying PbF solder to double layered boards, please check the component side

for excess solder which may flow onto the opposite side. (see figure below)

Suggested Pb free solder

There are several kinds of Pb free solder available for purchase. This product uses Sn+Ag+Cu

(tin, silver, copper) solder. However, Sn+Cu (tin, copper), Sn+Zn+Bi (tin, zinc, bismuth) solder

can also be used.

- 3 -

stamped on the

slice view