Panasonic CT-31SF14 Руководство по эксплуатации - Страница 6

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для ТЕЛЕВИЗОР Panasonic CT-31SF14. Panasonic CT-31SF14 36 страниц.

Installation

(cont.)

Antenna/CableConnections

Antenna Connection - For proper reception of VHF/UHF channels, an external

antenna is required. For best reception an outdoor antenna is recommended.

Antenna Mode must be set to TV. (Refer to Antenna Mode section.)

Indoor

Outdoor

Incoming Cable from Home Antenna

75 Ohm

on Back of TV

300 Ohm

Cable Connection - For reception of cable channels, connect the cable supplied by your local cable company. Antenna

Mode must be set to CABLE. (Refer to Antenna Mode section.)

Incoming Cable from Cable Company

NOTE: Certain cable systems offset some channels to reduce interference or have Premium (scrambled) channels. A

cable box is required for proper reception. Check with your local Cable company for compatibility requirements.

other Video Equipment

VCRs, Video Disc Players, Computers, TV games, and DSS equipment can also be connected to the antenna input

connection.

Care and Cleaning

Picture Tube (Turn set off)

Use a mild soap solution or window cleaner and a clean cloth. DO NOT USE ABRASIVE CLEANERS. Avoid excessive

moisture and wipe dry.

Plastic Cabinets

Wipe the cabinet with a soft cloth dampened with water or a mild detergent solution and wipe dry with a soft clean cloth.

Avoid excessive moisture. Do not use benzene, thinners or other petroleum based cleaners.

Wood Cabinets

When dusting or polishing the cabinet, use a clean soft cloth and stroke straight with the grain. An occasional coat of

furniture polish wili heip preserve the finish. Do not use benzene, thinners or other petroleum based cleaners. Do not

place objects made of plastic or rubber directly on top of the cabinet. A chemical reaction could result causing permanent

marring of the finish.

Remote Control Transmitter

To clean, wipe with a soft cloth slightly moistened with a mild detergent and then wipe dry with a soft clean cloth. Do not

use benzene, thinners or other petroleum based cleaners to clean the Remote Control Transmitter.