AquaSource 67464-0008D2 Руководство - Страница 5

Просмотреть онлайн или скачать pdf Руководство для Сантехническая продукция AquaSource 67464-0008D2. AquaSource 67464-0008D2 16 страниц.

ASSEMBLY INSTRUCTIONS

4. Before tightening the faucet connector to the

water supply, apply a second wrench to the

supply tube fitting. This will prevent the supply

tube from moving or twisting when tightening the

faucet connector. Do not overtighten.

5. Install the soap dispenser:

a. Remove the mounting nut (I) from the

pump flange (H). Insert the pump flange (H)

through the selected hole in the sink.

b. Secure the pump flange (H) to the sink with

the mounting nut (I).

c. From under the sink, screw the bottle (J)

onto the shank of the pump flange (H).

d. Insert the pump (G) down into the pump

flange (H).

OPERATION INSTRUCTIONS

1. After the installation is complete:

a. Remove the aerator from the faucet

(A) with the aerator tool (AA),

unscrewing in a counterclockwise

direction.

b.Turn on the water supply and allow

both hot and cold water to run for at

least one minute each.

c. While the water is running, check for

leaks.

into the faucet (A) using the aerator

tool (AA).