Diamond Audio SXP65v Руководство по установке - Страница 5

Просмотреть онлайн или скачать pdf Руководство по установке для Динамики Diamond Audio SXP65v. Diamond Audio SXP65v 8 страниц. Diamond sx black series speakers installation manual

Печатать страницу

SYSTEM CONNECTION

SX65v

Each SX crossover has a tweeter attenuation jumper and a phase adjustment located under the

removable cover. Choose "0" or "-2dB". If the tweeter is significantly closer to the listener than the

midrange, this adjustment should improve the frequency level balance. Choose "0" or "180" by

aligning the jumpers vertically or horizontally as shown inside the crossover. This adjustment may

improve frequency response depending on the tweeter mounting location relative to the midrange.

SXP65a/s

Each SXP crossover has a tweeter phase switch located under the removable cover. Choose "0"

or "180". This adjustment may improve frequency response depending on the tweeter mounting

location relative to the midrange.

RAF Outputs

Each SX / SXP component crossover has a third set of outputs marked "RAF". This stands for Rear

Acoustic Fill. This output can be used to power an additional speaker off the same channel without

affecting the impedance load on the source unit. This output provides 15-20% of the total power to

the extra speaker and is unfiltered or full range.

INPUT

WOOFER

TWEETER

RAF

INPUT

WOOFER

TWEETER

RAF

INPUT

WOOFER

TWEETER

RAF

INPUT

WOOFER

TWEETER

RAF