Diamond Audio Technology D171i Руководство по установке - Страница 5
Просмотреть онлайн или скачать pdf Руководство по установке для Динамики Diamond Audio Technology D171i. Diamond Audio Technology D171i 9 страниц. D1 series
Mounting Cup
(align tab and slot)
Clamp Ring
Tweeter
Tweeter Mounting
Screw
When flush or surface mounting tweeters, make sure the
desired location can accommodate the hole size and depth
required. Mount the cup using provided hardware (flush mount
illustration shown on right.) Mount surface cup at desired angle with
provided screws in tweeter mounting kit. Snake speaker wires through tweeter
cup, connect tweeter to wires, and snap tweeter into cup by aligning the notches.
Be careful not to push on the center of the tweeter grill.
Crossover Programming
Each D1 component set comes with a pair of model specific programmable crossovers. Under the cover
there is a jumper marked "TWT REFERENCE" or "- 2dB". Tweeter attenuation can be achieved by moving
the jumper to the appropriate position. The REFERENCE position has no attenuation effect on the tweeter.
5
©2008 Diamond Audio Technologies. All rights reserved.