Diamond Audio Technology HP650 Руководство по установке - Страница 6

Просмотреть онлайн или скачать pdf Руководство по установке для Акустическая система Diamond Audio Technology HP650. Diamond Audio Technology HP650 8 страниц. Hex pro series 6.5” component system

Печатать страницу
CROSSOVERS
CROSSOVERS
Each HEX
Pro component system comes with a pair of programmable crossovers. These crossovers
CROSSOVERS
™
Each HEX
Pro component set comes with a pair of programmable crossovers. These crossovers
™
use a combination of 12 and 24 dB/oct slopes to optimize the output of the tweeter and mid-bass
use a combination of 12 and 24 dB/oct slopes to optimize the output of the tweeter and mid-bass
Each HEX
Pro component set comes with a pair of programmable crossovers. These crossovers
driver. Each crossover features complete tweeter level, phase, and bi-amp programming capability.
™
driver. Each crossover features complete tweeter level, phase, and bi-amp programming
use a combination of 12 and 24 dB/oct slopes to optimize the output of the tweeter and mid-bass
An LED found on top of the crossover is used as a power limit indicator. When brightly lit, it indicates
capability. An LED found on top of the crossover is used as a power limit indicator. When brightly
that maximum power is being delivered to that channel.
driver. Each crossover features complete tweeter level, phase, and bi-amp programming
lit, it indicates that maximum power is being delivered to that channel.
capability. An LED found on top of the crossover is used as a power limit indicator. When brightly
Crossover Programming
Crossover Programming
lit, it indicates that maximum power is being delivered to that channel.
Under the sliding cover on the crossover is where the programming
Under the sliding cover on the crossover is where the programming
Crossover Programming
controls are located. The tweeter level control has four settings: +2,
controls are located. The tweeter level control has four settings: +2,
Under the sliding cover on the crossover is where the programming
0, -2, -4 dB. This is adjusted by changing the combinations of the
0, -2, -4 dB. This is adjusted by changing the combinations of the two
controls are located. The tweeter level control has four settings: +2,
two toggle switches labeled "TWT LEVEL". Use the key to the right of
toggle switches labeled "TWT LEVEL". Use the key to the right of the
the switches to configure tweeter level control. Switch the "BI-AMP"
0, -2, -4 dB. This is adjusted by changing the combinations of the
switches to configure tweeter level control. Switch the "BI-AMP"
switch only when running the crossover with a bi-amped signal. The
two toggle switches labeled "TWT LEVEL". Use the key to the right of
switch only when running the crossover with a bi-amped signal. The
"PHASE" switch swaps the tweeter 180 degrees out of phase for off
the switches to configure tweeter level control. Switch the "BI-AMP"
"PHASE" switch swaps the tweeter 180 degrees out of phase for off
axis tweeter installations.
switch only when running the crossover with a bi-amped signal. The
axis tweeter installations.
"PHASE" switch swaps the tweeter 180 degrees out of phase for off
axis tweeter installations.
COMPONENT SYSTEM CONNECTION
The following illustration shows how to connect one channel of the HP650 component system.
COMPONENT SYSTEM CONNECTION
The following illustration shows how to connect one channel of the HP650 component system.
COMPONENT SYSTEM CONNECTION
Amplifier
The following illustration shows how to connect one channel of the HP650 component system.
Optional bi-amp
Crossover
©2008 Diamond Audio Technologies. All rights reserved.
6
Tweeter
Mid-bass Driver