Panasonic aw-he40 series Краткое руководство по эксплуатации

Просмотреть онлайн или скачать pdf Краткое руководство по эксплуатации для Цифровая камера Panasonic aw-he40 series. Panasonic aw-he40 series 2 страницы. Adding another camera to existing system
Также для Panasonic aw-he40 series: Руководство по установке и настройке (12 страниц), Краткое руководство по эксплуатации (2 страниц), Руководство (4 страниц), Краткое руководство по эксплуатации (2 страниц)

Controlling Iris of AW-HE40 Camera Manually

(Setting Procedure via AW-RP50)

①

Press the button 1 at <CAMERA STATUS/SELECTION>. - (Fig. 1-A)

②

Hold down the CAMERA OSD button - (Fig. 1-B) at the upper right of the panel. The button will light up and

the on-screen menu will be displayed on SDI (or HDMI) output image from the selected AW-HE40 camera.

* If CAMERA OSD button is held down again while it is lit, the on-screen menu will disappear and the button's

light will go off.

③

Use F1 dial to change the following camera menu setting. - (Fig. 1-C)

【Location】

・ Camera ＞ Scene ⇒ Put the setting to [Manual1].

④ Press "IRIS AUTO" button (*1) on the front panel to switch between Auto and Manual. - (Fig. 1-D)

(*1) When this button's light is ON, it indicates Auto Iris. When it is OFF, it indicates Manual Iris and the iris

can be adjusted using IRIS dial. - (Fig. 1-E)

The status of "IRIS AUTO" button is linked with the following camera menu setting.

・ Camera ＞ Scene ＞ Contrast ＞ Contrast Mode ⇒ [Auto], [Manual]

（A）

（D）

（E）

Turn F1 → Select "Camera" → Press F1

* The setting can be selected from [Manual1 – 3].

(Figure 1)

(Displayed On-Screen Menu)

Press F1 → "Full Auto" blinks

（C）

（B）

Turn F1 → Select "Manual1" → Press F1