HP 316095-B21 - StorageWorks Edge Switch 2/24 Примечание к выпуску - Страница 18

Table 3 Zoning limits

Number of zone members in a zone

Number of zones in a zone set

Number of unique zone members in a zone set

Total number of zone members in a zone set (where a zone

member can be in multiple zones)

Characters per zoning name

Number of unique zone members in HAFM Zoning Library

Number of zones in HAFM Zoning Library

Number of zone sets in HAFM Zoning Library

Number of end ports

Number of devices supported (including loop devices)

Using the same ﬁrmware level

All Directors and Edge Switches in the same fabric should have the same ﬁrmware level

installed—whether 1Gb/s, 2Gb/s, or 4Gb/s capable—to ensure that this ﬁrmware

operates correctly.

The Edge Switch 2/12 had an interim ﬁrmware 05.00.00-12. This ﬁrmware cannot be

used for any other Edge Switch or Director. This interim version is compatible with

the M-Series ﬁrmware 05.02.00-13 used for the rest of the M-Series fabric products.

Firmware 08.01.00 is common for all M-Series fabric products, including the Edge

Switch 2/12.

Firmware 06.02.00-22 provides support for second-generation Edge Switch 2/12 and

Edge Switch 2/24 switches. This is the minimum M-Series ﬁrmware supported on the

second-generation Edge Switch 2/12 and Edge Switch 2/24.

Reinstalling feature licenses

Feature licenses (or keys) must be reinstalled after performing a factory reset on an

Edge Switch or Director to regain use of the licensed features (for example, SANtegrity

Binding).

Port lights on the Edge Switches and Directors are controlled by the CTP. Certain activities

such as ﬁrmware updates, IPLing the CTP, or switching over to the backup CTP (Director)

Zoning parameter

Maximum value

2048

1024

2048

4096

2048

1024