HP 316095-B21 - StorageWorks Edge Switch 2/24 Примечание к выпуску - Страница 11

Просмотреть онлайн или скачать pdf Примечание к выпуску для Переключатель HP 316095-B21 - StorageWorks Edge Switch 2/24. HP 316095-B21 - StorageWorks Edge Switch 2/24 17 страниц. Edge switch release notes
Также для HP 316095-B21 - StorageWorks Edge Switch 2/24: Руководство по обновлению (9 страниц), Руководство (41 страниц), Руководство (40 страниц), Примечание к выпуску (32 страниц), Примечание к выпуску (27 страниц), Руководство (26 страниц), Примечание к выпуску (27 страниц), Примечание к выпуску (25 страниц), Руководство по установке (24 страниц), Примечание к выпуску (23 страниц), Примечание к выпуску (23 страниц), Примечание к выпуску (22 страниц), Примечание к выпуску (23 страниц), Примечание к выпуску (19 страниц), Примечание к выпуску (19 страниц), Примечание к выпуску (18 страниц), Руководство по эксплуатации (17 страниц), Инструкции по обновлению (16 страниц), Руководство по эксплуатации (16 страниц), Руководство по установке (16 страниц), Примечание к выпуску (16 страниц), Примечание к выпуску (17 страниц), Примечание к выпуску (17 страниц), Примечание к выпуску (11 страниц)

Печатать страницу
HP 316095-B21 - StorageWorks Edge Switch 2/24 Примечание к выпуску
Disabling the SNMP Proxy
By default, the SNMP Proxy is enabled on all McDATA 4Gb SAN Switches. To ensure proper HAFM
functionality, disable the SNMP Proxy feature before attempting to discover the McDATA 4Gb SAN
Switches in HAFM.
To disable the SNMP Proxy:
1.
Telnet to the switch.
2.
Login to the switch.
3.
Enter:
admin start
4.
Enter:
set setup snmp
5.
Set the ProxyEnable setting to False.
6.
Enter Y at the following prompt:
Do you want to save and activate the snmp setup?
E-Mail filter considerations
The firmware e-mail filter overrides the HAFM e-mail filter. The firmware determines that certain events do
not generate an e-mail notification. In this situation, the e-mail message is not sent for these events even if
you add this type of event to the selected events section of the HAFM email filter dialog.
Managing McDATA 4Gb SAN Switch considerations
DO NOT use the Element Manager Fabric Binding feature on McDATA 4Gb SAN Switches. Element
Manager Fabric Binding does not synchronize with HAFM Fabric Binding. If both Fabric Binding features
are used, a disconnect can occur between the two features.
Examples
•
If you activate an ISL set while a port set is already active, the ISL set takes over and vice versa.
This is working as designed.
•
If you activate Switch Binding using the Element Manager, and then activate Fabric Binding using
HAFM, the McDATA 4Gb SAN Switch copies and appends the Fabric Binding to the current
Switch Binding security policy. This is working as designed. However, if you then deactivate
Fabric Binding using HAFM, it only deactivates on legacy M-Series and McDATA switches.
You must deactivate the policy using the Element Manager to deactivate it on the McDATA
4Gb SAN Switch.
If you also had Switch Binding activated and the learned Fabric Binding policy is merged, Switch
Binding becomes deactivated. A security hole exists if you do not realize this; however, it is apparent
that this happens when you look at the active policy. Activate the policy you created using the
Element Manager again to enable Switch Binding.
•
If there is no Switch Binding activated in the Element Manager and Fabric Binding is activated
using HAFM, Fabric Binding can be deactivated only by using HAFM. This is working as
designed.
•
If Switch Binding is activated using the Element Manager with an F-Port logged in to the McDATA
4Gb SAN Switch that is not in the Switch Binding membership list (for example, an administrator
command has not logged out the unwanted port), Fabric Binding cannot be activated using
HAFM.
(y/n):
[n]
HA-Fabric Manager release notes
1 1