HP StorageWorks 2/140 - Director Switch Примечание к выпуску - Страница 10

Просмотреть онлайн или скачать pdf Примечание к выпуску для Переключатель HP StorageWorks 2/140 - Director Switch. HP StorageWorks 2/140 - Director Switch 11 страниц. Director power cord advisory instruction
Также для HP StorageWorks 2/140 - Director Switch: Примечание к выпуску (27 страниц), Примечание к выпуску (24 страниц), Руководство по установке (22 страниц), Примечание к выпуску (20 страниц), Примечание к выпуску (13 страниц), Примечание к выпуску (10 страниц), Инструкция (1 страниц)

Known Issues

Ports May Accumulate Spurious Events

A port may accumulate "Invalid transmission word" and "Bit-Error Threshold Link

Incident" events when a transceiver is poorly seated resulting in a poor ground

connection.

Workaround

Reseating the optical transceiver will correct the problem.

The text shown in the Description field of the Director Properties panel for the

Director 2/140 may be incorrect. It may show SAN Director 64. This has no

effect on the operation of the Director 2/140. This is a user-configurable description

for the director, and may be changed to whatever you want by choosing Configure >

Identification using HAFM, or by choosing Configure > Director > Identification

using the Embedded Web Server interface.

If a Reset Configuration is performed on a Director 2/140 to reset the director to

factory configuration, an initial machine load (IML) is required to be performed to

complete the process. This is done by pressing the white button on the front of either

CTP card for more than three seconds. This can also be accomplished by turning the

power to the Director 2/140 off, and then back on.

director release notes