HP StorageWorks 2/32 - SAN Switch Примечание к выпуску - Страница 12

Просмотреть онлайн или скачать pdf Примечание к выпуску для Переключатель HP StorageWorks 2/32 - SAN Switch. HP StorageWorks 2/32 - SAN Switch 32 страницы. Fabric manager version 3.0.x release notes
Также для HP StorageWorks 2/32 - SAN Switch: Руководство по установке (20 страниц), Руководство пользователя (22 страниц), Примечания к выпуску прошивки (14 страниц), Примечание к выпуску (48 страниц), Руководство по установке (6 страниц), Примечание к выпуску (14 страниц), Примечание к выпуску (4 страниц)

Печатать страницу
HP StorageWorks 2/32 - SAN Switch Примечание к выпуску

Compatibility

Compatibility
The SAN Switch 2/32 is compatible with the following switches in the fabric:
IMPORTANT: Earlier versions of SAN Core Switch 2/64 firmware (that is, Version 4.0.0x)
cannot be loaded onto a SAN Switch 2/32.
•
hp StorageWorks SAN Core Switch 2/64 running Fabric OS Version 4.0.2b or
later
•
hp StorageWorks SAN Switch 2/8EL, hp StorageWorks SAN Switch 2/16 EL, or
hp StorageWorks SAN Switch 2/16 switches running Fabric OS Version 3.0.2c or
later
•
premerger hp or premerger Compaq switches running Fabric OS Version 2.6.0c or
later
NOTE: For the Fabric OS Version 2.x switches or Fabric OS Version 3.x switches, the Core
Switch PID Format must be enabled (that is, set to 1) using the configure command before it
can interconnect with the SAN Switch 2/32.
For more information regarding the Core Switch PID Format, please refer to Appendix B in the
hp StorageWorks SAN Switch 2/32 Installation Guide, "Updating the Core PID Format." A
hardcopy version of the installation guide is supplied with your switch.
QuickLoop
QuickLoop, in either its original hub emulation mode, or in Fabric Assist mode, is not
supported on the SAN Switch 2/32. This means that direct attachment of private hosts
to the SAN Switch 2/32 is not supported. However, fabric or loop targets attached to
the SAN Switch 2/32 may be included in Fabric Assist Zones for private hosts
attached to other switches in the fabric.
SFPs
The SAN Switch 2/32 supports the following SFP types:
•
Finisar FTRJ-8519-3-2.5
•
Finisar FTRJ-8519-7D-2.5, Compaq part number DS-DMSHT-AA,
HP part number A6515A (Smart SFP)
•
Finisar FTRJ-1319-3-2.5,Compaq part number DS-DMLNG-AA,
HP part number A6516A
•
IBM 42P21SNYAA10
•
Agilent HFBR 5720l
12
SAN switch 2/32, version 4.0.2b release notes