HP XP20000/XP24000 Руководство по конфигурации - Страница 28

Просмотреть онлайн или скачать pdf Руководство по конфигурации для Переключатель HP XP20000/XP24000. HP XP20000/XP24000 46 страниц. Hp storageworks xp disk array configuration guide: vmware (a5951-96106, september 2010)
Также для HP XP20000/XP24000: Примечание к выпуску (13 страниц), Руководство по интеграции (29 страниц), Примечание к выпуску (4 страниц), Руководство администратора (50 страниц), Руководство по конфигурации (42 страниц), Руководство по конфигурации (40 страниц), Руководство по конфигурации (40 страниц), Руководство по конфигурации (36 страниц), Руководство по конфигурации (36 страниц), Руководство по конфигурации (30 страниц), Руководство по конфигурации (36 страниц), Примечание к выпуску (5 страниц), Руководство по конфигурации (46 страниц), Справочное руководство (46 страниц), Руководство по конфигурации (40 страниц), Руководство по конфигурации (44 страниц), Руководство по конфигурации (38 страниц), Руководство по конфигурации (34 страниц), Руководство по конфигурации (30 страниц), Руководство по конфигурации (30 страниц)

Печатать страницу
HP XP20000/XP24000 Руководство по конфигурации
Click Browse.
Highlight all of the servers that you want to add and click Add to Cluster. You may use the shift
and control keys to select multiple nodes.
After all servers in the cluster appear on the list, click Next.
Wait while NWDeploy accesses each node.
After all services have been accessed and added to the "NetWare Servers in Cluster" list, click
OK.
7.
Enter a unique IP address for the Master_IP_Address_Resource (for example, 10.1.1.5) in the
Cluster IP Address Selection window and click Next.
8.
Set up the shared media:
Verify that Yes is selected next to "Does the cluster have shared media?"
Select No next to "... mirror Cluster Partition", if prompted.
Click Next to accept the default shared media settings, if prompted.
Select Start Clustering on newly added or upgraded servers after installation.
9.
Install the licenses:
Insert the appropriate Cluster License diskette into drive A: of the client.
Click Next.
Click Next to select all available licenses.
Click Next at the summary screen.
10.
Click Finish to complete installation. Main file copy starts now.
11.
When the installation is complete, click Close.
12.
Wait for the Deployment Manager to reappear on the client. Click Cancel, then click Yes to close
the Deployment Manager.

Creating logical volumes

NetWare 6.0
1.
Using ConsoleOne, select the targeted server, right click, and click Properties.
2.
Click the Media tab, and click NSS Logical Volumes.
3.
Click New, enter a name for the volume, and click Next.
4.
In the Create Logical Volume - Storage Information window, select the desired pool/device, enter
the desired Volume Quota, then click Next.
5.
In the Create Logical Volume - Storage Information window check Activate and Mount in the "On
Creation" box, then click Finish.
6.
Confirm that the logical volume has been created.
7.
Map the created Logical Volume as the Network Drive.
8.
Confirm the mapped drive.
Netware 6.5
1.
Enter NSSMU at the server console.
2.
In the main menu, select Volumes.
28
Middleware configuration