HP Xw460c - ProLiant - Blade Workstation Руководство по установке - Страница 27

Просмотреть онлайн или скачать pdf Руководство по установке для Переключатель HP Xw460c - ProLiant - Blade Workstation. HP Xw460c - ProLiant - Blade Workstation 33 страницы. Mezzanine card installation instructions for supported hp proliant c-class bladesystem servers
Также для HP Xw460c - ProLiant - Blade Workstation: Руководство по внедрению (35 страниц), Руководство по предотвращению ошибок (12 страниц), Техническая белая книга (12 страниц), Обновление прошивки (9 страниц), Руководство по установке (2 страниц), Руководство по часто задаваемым вопросам (14 страниц), Плакат с настройками (9 страниц), Руководство по управлению (28 страниц), Руководство по аппаратному обеспечению (23 страниц), Обзор (35 страниц), Руководство пользователя (33 страниц), Руководство по оптимизации (13 страниц), Ограниченная гарантия (10 страниц), Руководство по установке (10 страниц), Руководство по установке (8 страниц), Инструкции по установке (4 страниц), Инструкции по установке (2 страниц)

Печатать страницу
HP Xw460c - ProLiant - Blade Workstation Руководство по установке
Parameter
Privilege level
User permissions

Server and interconnect EBIPA configuration parameters

Enclosure Bay IP Addressing (EBIPA) enables you to assign static IP addresses to server bays, interconnect
bays (or both) in the enclosure. These IP addresses are used by the server blade Integrated Lights Out (iLO)
ports when inserted into a bay. In addition, an interconnect module (switch) management port, if available,
uses the preassigned IP address when inserted into the interconnect bay.
Omit this step if your network has an external DHCP service or if you want to manually assign static IP
addresses individually to the server blades and interconnect modules.
Record the configuration parameters in the following tables.
Table 4-5 Shared device settings for device bays table
Parameter
Subnet mask
Gateway
Domain
DNS server 1
DNS server 2
DNS server 3
NTP server 1
NTP server 2
Value
Value
Server and interconnect EBIPA configuration parameters
Possible value
Administrator, Operator, or User
—
Possible value
###.###.###.###, where ###
ranges from 0 to 255
###.###.###.###, where ###
ranges from 0 to 255
A character string that includes
alphanumeric characters and
the dash
###.###.###.###, where ###
ranges from 0 to 255
###.###.###.###, where ###
ranges from 0 to 255
###.###.###.###, where ###
ranges from 0 to 255
###.###.###.###, where ###
ranges from 0 to 255
###.###.###.###, where ###
ranges from 0 to 255
Description
Only the Administrator can set
the privilege level.
Administrator—Can perform
all actions on the enclosure
Operator—Can perform all
actions on the enclosure
except administering users
and certificates
User (read-only)
Can view all information
Can launch web
interfaces to other
devices
Cannot change any
configuration settings
A list of the Onboard
Administrator bays, server bays,
and interconnect bays that can
be managed by the user
Description
The subnet mask for the server
bays
The gateway address for the
server bays
The domain name for the server
bays
The IP address for the primary
DNS server
The IP address for the secondary
DNS server
The IP address for the tertiary
DNS server
The IP address of the primary
server that synchronizes time
and date using the NTP protocol
The IP address of the secondary
server that synchronizes time
and date using the NTP protocol
27