AQUATHERMA NATURE MIRAGE Руководство пользователя - Страница 8

Просмотреть онлайн или скачать pdf Руководство пользователя для Горячая ванна AQUATHERMA NATURE MIRAGE. AQUATHERMA NATURE MIRAGE 16 страниц.

AQUATHERMA NATURE MIRAGE Руководство пользователя
COMPONENTS
PUMP (MOTOR)
The pump circulates the water, in a closed circuit, between the spa and the
technical module in order to be freed from its impurities by the filter and
heated by the water heater before returning to the spa basin through the
water jets.
No special maintenance is necessary. It can stay outside during the winter,
whether used or not.
Only pay attention to:
- Ensuring that the water access valves are all in the OPEN or UP position
before turning on the power.
- Unscrew the strainer cover and add water for the initial start-up or the first
start of the season. This important operation is intended to prime the
pump during start-up.
- Carry out the steps recommended during the winter preparation process if
you do not wish to use your spa during the cold season. Refer to the
WINTER PROCEDURES chapter for details.
WATER ACCESS VALVES
The water access valves must be in the OPEN position at all times when the
power is on.
There is an access valve for each of the inlets and outlets included in the
technical module.
They can only be put in the OFF position during a technical service operation
without emptying the spa pool (e.g., when cleaning the filter cartridge or
when repairing the technical module).
Water access valve
in OPEN position
Technical module – Pumping systems
Pump (motor)
Pump
Water access valve
in CLOSED position
Strainer
cover
Strainer
7