Diamond Products CARBON SPOT 55 Руководство по эксплуатации - Страница 4

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Скребок Diamond Products CARBON SPOT 55. Diamond Products CARBON SPOT 55 11 страниц.

Печатать страницу

YOUR NEW MACHINE:

Diamond Products US thoroughly tests every

machine it sells before it is packaged. When

you receive your new machine, examine the

packaging for signs of shipping damage.

Carefully unpack the machine and inspect it.

If you see evidence of damage to the

container

the

freight carrier immediately.

Additionally, ensure all parts and accessories are

present; if you notice anything missing, contact

your distributor without delay.

NORMAL USE:

The Diamond Carbon Spot 55 and Carbon

Spot 55H are designed to clean small

areas like furniture, area rugs,

automobiles, and spots in carpets. These

machines are not suited for cleaning the

carpet in an entire room.

CHEMICALS:

The use of clear water in the machine is

recommended, with the use of properly diluted

cleaner applied as a pre-spray on the area to

be cleaned; however, you may mix water and

cleaning chemicals in a bucket -- according to

directions on the chemical label -- and then

pour into the solution tank. If you chose to

use chemicals in the machine, always use a

cleaner with a pH as close to neutral as possible

to avoid premature wear of the pump, seals,

and/or other components. Damage caused by

the use of strong chemicals is not covered by

the warranty.

The use of powder chemicals is discouraged;

unless they are mixed very thoroughly and

rinsed out completely at the end of the job,

powdered cleaners could cause a build-up in the

pump, lines, heater and/or quick disconnects.

Any problem caused by a chemical build-up is

not covered by warranty.

-4-

contents,

contact the

If foaming occurs as you clean, use a defoamer,

either in the recovery tank or on the area being

cleaned, to prevent overﬂ ow which can cause

water damage.

TOOLS & ACCESSORIES:

Use only manufacturer's recommended tools

and accessories. The hand tool is made

from stainless steel and will provide years of

trouble-free use. If the spray valve begins to

leak or if the spray tip gets worn and is no

longer providing a nice even spray pattern,

order a replacement part from your distributor.

The solution line and vacuum hose are made

of durable and long-lasting components and,

with proper care, they both should last for

years. Use a spray silicone to keep the quick

connect couplings moving freely.

CARE & MAINTENANCE:

For optimum performance ﬂ ush the machine

with clear water at the end of each working

day. Once a month, minimum, run a ﬂ ushing

compound through the machine to break up

any mineral or chemical build-up that may have

formed from the use of hard water or chemicals.

The vacuum motor and the pump do not require

any scheduled maintenance; however, the

vacuum motor may require replacement brushes

after 700 - 1000 hours.

To help maintain a professional image, clean the

body with an all purpose detergent, and protect

it with automobile interior polish. Lubricate the

wheels, castors, and quick disconnects with an

all purpose, silicone spray.

Diamond Products

Operator's Manual