Panasonic DLP PT-DZ570E Руководство по работе с сетью - Страница 15

Просмотреть онлайн или скачать pdf Руководство по работе с сетью для Проектор Panasonic DLP PT-DZ570E. Panasonic DLP PT-DZ570E 42 страницы. Dlp based projector
Также для Panasonic DLP PT-DZ570E: Обзор (4 страниц)

Печатать страницу
NETWORK menu (continued)
■
Default settings of [USER1] - [USER3]
The following settings as [USER1] - [USER3] in the wireless LAN are set before the projector leaves the factory.
SSID
DHCP
IP ADDRESS
SUBNET MASK
DEFAULT GATEWAY
MODE
AUTHENTICATION
ENCRYPTION
CHANNEL
3
Press ▲ ▼ to select [STORE], and press <ENTER> button.
Save the current network settings.
Note
When configuration is completed, you need to select [STORE] and press the <ENTER> button. At this point,
select [RETURN] to go back to the previous screen (2/3), or select [CANCEL] to cancel the configuration
change.

NETWORK CONTROL

Set when you want to control the projector from a computer connected to the network.
1
Press ▲ ▼ to select [NETWORK CONTROL], and press
<ENTER> button.
The [NETWORK CONTROL] screen will be displayed.
2
Press ▲ ▼ to select items, and press ◄► to change the setting.
WEB CONTROL
PJLink CONTROL
COMMAND CONTROL
COMMAND PORT
STORE
If settings have been made without an administrator password of the Web browser control, add 2-byte "00"
_
instead of STX, and a linefeed code (0Dh) instead of ETX. If settings have been made with an administrator
password of the Web browser control, add a 32-byte hash value and "00" instead of STX and a line-feed code
(0Dh) instead of ETX. The hash value is created by MD5 combining "admin1:", password, ":" and random
numbers. The random numbers are 8-byte values sent from the projector when connecting.
Panasonic Projector
OFF
192.168.11.100
255.255.255.0
192.168.11.1
AD HOC
OPEN
NONE
11
Set this to [ON] when you want to perform control with the Web browser.
Set this to [ON] when you want to perform control with the PJLink protocol.
Set to [ON] to control using the control command via the serial
_
terminal.→See page 38
Set the port number used for the command control.
Save the current network control settings.
15
NETWORK
PROJECTOR NAME
NAME1234
WIRED LAN
WIRELESS LAN
USER1
NETWORK CONTROL
NETWORK PASSWORD
OFF
NETWORK PASSWORD CHANGE
LIVE MODE CUT IN
OFF
COMPUTER SEARCH
MULTI-LIVE
NETWORK STATUS
MENU SELECT
SUB MENU
ENTER