Diamond Tech Fuseworks Инструкции - Страница 3

Просмотреть онлайн или скачать pdf Инструкции для Печи Diamond Tech Fuseworks. Diamond Tech Fuseworks 4 страницы. Glass fusing in a microwave kiln

Печатать страницу

look at your piece but do not, as this can be dangerous and will result in cracked projects.

4. Do not reuse the kiln until it has completely cooled for at least 30 minutes. Continuous use without

cooling can cause damage to the kiln.

5. Your fused project must cool completely before removing from the kiln. This can take up to 40-50

minutes. Once cooled, you can remove the fiber paper from the back of the fused project by rubbing

the surface with a wet paper towel or cleaning the project under warm water.

Problem: Cracked glass in the kiln during firing.

Solution:

Clean and dry glass thoroughly. Make sure glass being used has the same Coefficient of

Expansion (COE).

Problem: After glass project cools, fused project cracks

Solution:

Cool more slowly. After removing the kiln form the microwave, leave the lid on for at least 30

minutes in an area free of drafts.

Problem: Fused project has sharp edges.

Solution:

use a glass file or fingernail file to remove burs.

Problem: Glass embeds itself into kiln walls or base.

Solution:

Allow both glass and kiln to cool completely. use a utility knife to carefully cut and remove

glass from the kiln.

Problem: Cracks, blisters and/or loss of interior kiln coating.

Solution:

This should not impact the operation of the kiln. If large areas of the coating are damaged and

the glass is heating unevenly, a replacement top is recommended.

Problem: Dichroic glass shatters and breaks during fusing.

Solution:

This could be the result of heating the glass too rapidly. Try reducing the power of the

microwave by 50% for a longer length of time.

•

An 800 to 1200 WATT microwave oven is recommended for use with Fuseworks™ Microwave Kiln.

Do NOT use microwave ovens with plastic interiors.

•

Follow ALL microwave manufacturers safety instructions, especially those referring to ventilation and

dedicated plug, etc.

•

Microwave needs to be free of food and other debris before use with the Fuseworks™ Microwave

Kiln.

•

Clean the microwave thoroughly after each use with a household cleanser recommended by the

microwave oven manufacturer.

•

The interior of the Fuseworks™ Microwave Kiln and its contents can reach temperatures of

1400ºF - 1600ºF which is extremely hot. Temperatures this high can cause serious bodily harm and

property damage if not handled properly. Keep kiln away from children and pets while fusing

and cooling.

•

Prolonged heating of Fuseworks™ Microwave Kiln can cause damage to the interior of the kiln and

microwave. Do not exceed 6 minutes of continuous fusing/heating time.

•

A minimum 3" clearance must be maintained between the ceiling of the microwave and the top of the

kiln.

•

If you do not have a turntable, it is recommended that a ceramic fiber blanket be used under the kiln.

•

Remove Fuseworks™ Microwave Kiln immediately from the microwave oven when heating is

complete.

Troubleshooting

IMPORTANT SAFeTy WARNINGS