Diamond Traffic Products TTC-4420 Руководство - Страница 12
Просмотреть онлайн или скачать pdf Руководство для Кассовый аппарат Diamond Traffic Products TTC-4420. Diamond Traffic Products TTC-4420 14 страниц. Trail counter
Печатать страницуautomatically.
memory will not be lost. Just install new batteries and retrieve data.
13. Quick Set-Up Step List
Install batteries to power on
Note serial number and site location
At "total" screen touch magnet to red dot
Align reflector to capture beam and silence sonalert.
Counting will start in about 20 minutes.
14. Quick Data Read List
Using Data Hog
Connect Data Hog to Trail Counter RS-232 Serial Port
Turn "On" Data Hog
When Data Hog flashes complete code you are done
Using Pencil and Notepad List
Touch magnet to yellow display dot on side of counter
Total count will be displayed
Repeated magnet touches to yellow dot will bring up each
hour interval. Copy data on notepad with pencil.
15. When the unit is stored for more than one or two weeks remove the
four "D" cell batteries.
16. How To Read Data
Counter is capable of recording one-hour interval counts of up to 420 days;
touch magnet to yellow dot on side of counter, display will show grand
running total with first touch and the number of interval totals stored in
memory with second touch. Third touch will cause display to show the
count for the first recorded interval. Successive magnet touches will bring
up data for successive intervals. Remember the counter does not know
what day it is or time of day, so you must keep in your notes, the day and
time the court started and enter this into the computer when data is read out
of Data Hog or PDA.
17.
Restarting a new count in the TTC-4420 Trail Counter:
If you are positive that all data stored in the trail counter has been
transferred successfully to your PC you can erase the old date in the
trail counter and reset the counter for a new count.
To reset the counter and start a new counting cycle. You must first have
the display active. If the display is blank, activate it by touching the
magnet to the yellow dot.
P11
Even if the batteries go completely dead, data in