Panasonic SA-AK750 Руководство по эксплуатации - Страница 16

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Стереосистема Panasonic SA-AK750. Panasonic SA-AK750 20 страниц. Panasonic sc-ak750 stereo systems: operating instruction
Также для Panasonic SA-AK750: Руководство по эксплуатации (28 страниц)

Печатать страницу

Panasonic SA-AK750 Руководство по эксплуатации

External unit (continued)

Connecting and playing a USB mass

storage class device

The USB connectivity enables you to connect and play

MP3 tracks from USB mass storage class. Typically, USB

memory devices. (Bulk only transfer)

Preparation

Before connecting any USB mass storage device to the unit,

ensure that the data stored therein has been backed up.

It is not recommended to use a USB extension cable. The

USB device is not recognised by this unit.

USB enabled device

(not included)

It is not recommended

to use a USB extension

cable. The device

connected via the cable

will not be recognised by

this unit.

Reduce the volume and connect the USB mass storage

device.

Press [6, USB] to start play.

Action

pause play

Press [6, USB].

Press again to resume play.

stop play

Press [7, CLEAR].

"RESUME" is displayed. The position is

memorized.

Press [6, USB] to resume.

Press [7, CLEAR] again to clear the position.

skip tracks

Press [4,

skip album

Press [ALBUM (

the numeric buttons in the stop mode.

For other operating functions, they are similar as those

described in "Discs" (\ page 9 ~ 11).

Recording from a USB mass

storage class device

Press [4,

/ REW ] or [¢,

desired track for recording.

Press [¶, REC] on the main unit to start recording.

RQT8043

RQTV0205-B.indd 16

/ REW] or [¢,

/ FF].

)] in the play mode.

)] once and then

/ FF] to select the

Compatible devices

Devices which are deﬁ ned as USB mass storage class:

• USB devices that support bulk only transfer.

• USB devices that support USB 2.0 full speed.

Supported format

Files must have the extension ".mp3" or ".MP3".

Note:

• CBI (Control/Bulk/Interrupt) is not supported.

• A device using NTFS ﬁ le system is not supported [Only FAT 16/32

(File Allocation Table 16/32) ﬁ le system is supported].

• Depending on the sector size, some ﬁ les may not work.

• This unit can access up to 255 albums (including blank folders)

and 2500 tracks.

• The maximum number of tracks in a folder are 999 tracks.

• Only one memory card will be selected when connecting a

multiport USB card reader. Typically the ﬁ rst memory card

inserted.

• Disconnect the USB card reader from the unit when you remove

the memory card. Failure to do so may cause malfunction to the

device.

• When you connect your digital audio player to the USB port,

it charges all the time except in standby mode or during tape

recording.

Changing the main unit and

MUSIC PORT

remote control mode

The remote control and main unit are factory-set to

"REMOTE 1" mode.

If your remote control affects other equipment during

operation, you can switch to operate in "REMOTE 2" mode.

To switch to "REMOTE 2" mode

While pressing and holding [MUSIC PORT] on the main

unit

Press and hold [2] until "REMOTE 2" appears on

the main unit display.

Press and hold [ENTER] and [2] for at least 2

seconds.

The main unit and remote control are now set to

operate in "REMOTE 2" mode.

To return to "REMOTE 1" mode

Perform steps 1 and 2 above but use [1] instead of [2] for

both steps. ("REMOTE 1" appears on the main unit during

step 1.)

The remote control cannot work with the main unit if

their modes are different.

"REMOTE 1" or "REMOTE 2" appears on the main unit

display when you operate the remote control.

If "REMOTE 1" appears (The main unit is in "REMOTE 1"

mode.)

Press and hold [ENTER] and [1] on the remote control for

at least 2 seconds.

If "REMOTE 2" appears (The main unit is in "REMOTE 2"

mode.)

Press and hold [ENTER] and [2] on the remote control for

at least 2 seconds.

2/22/07 7:02:53 PM